ZIF-650M drilling rig
- Customer pickup,
- Courier
- In detail
- BrandАлтайгеомаш
- Country of manufactureRussia
- ConditionNew
The ZIF-650M drilling rig is intended for well-drilling on solid minerals at height above sea level no more than 1000 m. The unit in stationary drilling rigs is used to land kolonkovy drilling.
The boring unit consists of the machine with the electric drive, a case of management.
The main electric motor is installed on a bed of the machine and connected to a friction clutch shaft the elastic coupling. When moving the machine on a frame the electric motor moves together with it. Inclusion and switching off of all electric motors is carried out by means of buttons of management. All electrostarting equipment is mounted in a case of management on which face there are a voltmeter and the ampermeter for measurement of tension and current of the electric motor of the machine, the counter of active energy.
The rotating parts of drives of the unit have special protections.
Technical characteristics
|
Drilling depth nominal, m at hard-alloy drilling by crowns of Ø of 93 mm at diamond drilling by crowns of Ø of 59 mm |
500 800 |
|
Diameter of drilling, mm final: at diamond drilling at hard-alloy drilling |
151
59 93 |
|
Range of tilt angles of a rotator, hail |
60 … 90 |
|
Diameter of boring pipes, mm |
63,5; 54; 50; 42 |
|
Weight, kg |
2800 |
|
Rotator frequency of rotation of a boring shell with the drive from the electric motor, with-1 (rpm) at direct and return rotation minimum maximum |
1,45 (87) 13,3(800) |
|
The maximum effort developed by hydraulic cylinders of a rotator, kN (CU) up down |
75+10 (7,5+1) 55+8 (5,5+0,8) |
|
Tightening cartridge for boring bars |
spring and hydraulic |
|
Winch loading capacity, kN (CU) nominal maximum |
35(3,5) 44(4,4) |
|
district speeds of a drum, m/s |
0,7; 0,95; 1,5; 2,04; 2,72; 3,7; 4,6; 6,25 |
|
rope type |
17-G-I-N-1764 (180) |
|
rope capacity of a drum at a navivka in three layers, m |
65 |
|
Working pressure in a hydraulic system, MPa (kgf/cm2) |
4,9+0,49 (50+5) |
|
Oil pump, type |
lamellar |
|
Machine electric motor power, kW frequency of rotation of a shaft, rpm |
30 1470 |
|
Oil pump electric motor power, kW frequency of rotation of a shaft, rpm |
2,2 960 |