Products of other enterprises
Technical characteristics
- BrandСумы-Электрод
- Weldable materialLow alloy steel
Description
Welding electrodes of ANO-24 diameter are 5.0 mm
| E46 type |
Electrodes for welding carbonaceous and low-alloyed by staly ANO-24 |
||||||
| GOST 9466-75
GOST 9467-75 TU 14-4-1449-87 |
ISO 2560 | E432R21 | E46-ANO-24-Ø-UD
E430(3)-P21 |
||||
| DIN 1913 | E4332R21 | ||||||
| AWS A.5.1 | E6012 | ||||||
| BS 639 | E4332R21 | ||||||
| Basic purpose
For welding of designs from low-carbonaceous staly the brands St3, 10, 20, etc. |
|||||||
| Welding modes | |||||||
| Current, And | Constant, return polarity | ||||||
| Provision of welding | Diameter of an electrode, mm | ||||||
| 3.0 | 4.0 | 5.0 | |||||
| Lower | 100-140 | 170-210 | 190-270 | ||||
| Vertical (from below up) | 90-110 | 140-150 | 150-170 | ||||
| Ceiling | 100-120 | 140-170 | — | ||||
| The provision of the welded seams | |||||||
| Chemical composition of metal of a seam (typical value), % | |||||||
| With
Carbon |
Si
Silicon |
Mn
Manganese |
S
Sulfur |
P
Phosphorus |
|||
| 0,10 | 0,20 | 0,60 | 0,025 | 0,030 | |||
| Mechanical properties of metal of a seam (typical value) | |||||||
| Temperature
tests, ºС |
Temporary to a soprotivleniyerazryv,
MPa (kgf/mm2) |
Relative lengthening, % | Impact strength,
MDzh/sq.m (kgf of m/cm2) |
||||
| +20 | 490 (50,0) | 22,0 | 1,2 (12,0) | ||||
| - 20 | — | — | 0,5 (5,0) | ||||
| Humidity of electrodes before application ≤ 0,7% | |||||||
| Recommendations | To carry out welding a short arch, to smooth out edges before welding. Repeated calcination of electrodes before welding 170÷190 ºС within 40 minutes. | ||||||
Contact the seller
Welding electrodes of ANO-24 diameter are 5.0 mm
