- Country of manufactureRussia
Water - repellent impregnation for imparting water - repellent properties to decorative materials . Protects the surface from the appearance of efflorescence , gives the surface "lotoseffekt" . Significantly reduces water absorption by the surface , leaving it vapor - permeable .
INSTRUCTIONS FOR USE
Description of material : Hydrophobizing impregnation - water dispersion for imparting water - repellent properties to decorative paints and plasters . Compare on the efficiency with lacquer coatings on the basis of solvent , creates on the surface "lotoseffekt ( " effect of lotus' ) " , which is stored for a long time . Much It reduces the absorption of the water surface , with this leaving its vapor - permeable , does not create a film on the surface . The rate of absorption of the product depends on the nature of the substrate , the coating will be somewhat different in dependence on the porosity and type of substrate .
Field of application : Intended for imparting water - repellent properties of various surfaces in the construction and repair of the internal and external work . It is applied on surfaces coated with water - dispersive paints and varnishes . On wood , brick , stone , concrete surface is recommended repellent Vanwater (Vanwater ). Not suitable for application to non - porous ( plastic , metal , glass and so on . N . ) And stained organorazbavlyaemymymi materials surface . The effect is observed immediately after drying , the highest level of hydrophobicity is achieved after 48 hours , depending on weather conditions .
Application procedure : The water repellent may exfoliate , which is not a defect . Stir well before use ! Apply to a dry surface to be treated . It is possible to apply a multi - layer coating . Apply the second and each subsequent layer not earlier than after 30 minutes , but not later , than after 6 hours after the previous layer . Usually two layers are sufficient . The application of the third and subsequent coats , as a rule , does not provide great advantages .
Care of the surface in the process of operation : the treated surface may be washed with warm water with an alkaline washing agent sponge , cloth , and other non - abrasive materials not earlier , than after 2 days after dyeing .
Tools : brush , roller , swab or spray gun .
Dilution : ready to use , does not require a dilution .
Flow rate : average rate of 0.1 - 0.15 kg / m 2 in dependence on the type of the porosity of the surface .
Packing : 1 kg .
Application conditions : recommended application temperature - from + 5 ºС to + 35 ºС , humidity - not higher than 70% . Do not apply on wet surfaces , as well as in rainy weather .
Drying time "to touch" : no more than 30 minutes at a temperature of 20 ( ± 2) ºС and humidity not higher than 70% .
The time of complete drying : not more than 48 hours at a temperature of 20 ( ± 2) ° C and humidity not higher than 70% .
Cleaning of tools : with water .
Term life coverage : forecasted period of service in depending on the type of substrate and conditions of operation of 2 years .
Transportation and storage conditions : store and transport the water repellent in a hermetically sealed container at temperatures from + 5 ºС to + 35 ºС . Keep away from contact with direct solar rays . Keep away from heating appliances .
Shelf life in original packaging : 24 months .
Measures Precautions : at work use gloves and protective clothing . Water repellent has a weak odor , fire - and explosion - proof . The dried coating is not has harmful effects on human . When hit in the eye wash with running water and consult a doctor . If it enters the digestive tract refer to the doctor .
Disposal : disposed of in accordance with legislation .