- Country of manufactureRussia
The cost of products is calculated individually, depending on the configuration, equipment configuration and customer requirements.
Macpresse Europa is one of the most renowned international companies among the manufacturers of waste and recycling presses. The company has been run by the Scotuzzi family since 1875, the year of its foundation. Today it is present in more than 50 countries around the world with a wide network of service centers. The machines are manufactured in three of our own factories in Milan, Italy, where the general and operational management is also located: the covered area is 17,000 square meters out of a total area of 270,000 square meters.Main settings
|Pressing force||170 tons|
|Carriage specific pressure||14 kg / cm2|
|Cycle time||15 sec|
|Cycles per minute (without material)||4|
|Volumetric performance||610 m³ / hour|
|Performance depending on the density of the loaded material||RDF - 35 t / h, solid waste - 45 t / h|
|Installed power of the main engine||90 kWt|
|Bale dimensions (WxHxL)||1100х1100х (adjustable length)|
|Bale weight depending on material density||300 - 800 kg|
|Number of rows of strapping wire||5|
|Hopper dimensions||1800x1020 mm|
|Bale chamber volume||2.5 m³|
|Press dimensions (LxWxH)||12970x5945x4055 mm|
|Internal lining with Hardox sheets||Yes|
|Press weight||41.9 t|
|Filtrate sampling device||option|
MAC 110L / 1 - waste baler with a capacity of 40 - 45 tons / hour. It has been designed to handle municipal solid waste, industrial and commercial waste, and RDF fuels.
The MAC 110L / 1 is ideal for transfer stations, landfills and anyone who needs to handle large flows of various materials.
The control panel allows you to better control the operation of the press: to adjust production parameters - pressure and back pressure, bale length, etc. The infographic system allows real - time diagnostics.
HARDOX wear linings are bolted to the brake duct and seal box and can be easily replaced. This system protects the machine from abrasion and corrosion.
The cutting blades are highly efficient, hardened and interchangeable depending on the material being cut.
The horizontal strapping system is designed to bind with both plastic and steel wires. This system provides greater operator safety. Maintenance is carried out at floor level.