Wall sandwich panel
- Customer pickup,
- Courier
- In detail
- BrandСП ПРОМ
- Country of manufactureRussia
- Thermal insulation materialMineral wool
- ColorRAL
- Combustibility of the materialIncombustible
- от 50 до 250 мм.толщина
Panels – the three-layer construction material consisting of two metal sheets between which the heater settles down.
- Metal sheets. Are established from two parties of panels, perform decorative and protective function.
- Heater. Taking into account the preliminary requirement of consumers as a heater polymeric materials of different types or the pressed mineral wool can be used.
All layers stick together among themselves by means of synthetic structure with high rates of adhesion. On industrial productions two-component polyurethane glue is used, the structure prepares and put automatically on lines just before drawing. Thickness of an insulating layer is chosen taking into account a climatic zone of an arrangement of the building, at the expense of the wide range there is an opportunity to pick up characteristics for heatsaving taking into account the acts existing today. High technical characteristics considerably broaden spheres of use of materials. It is possible to carry the following indicators to the main advantages:
- Low coefficient of heat conductivity. Modern heaters from mineral wool or polyfoams 10 cm thick have the same indicators by heatefficiency, as well as a wooden wall 60 cm thick or brick 120 cm thick. The heat conductivity is lower, the sound insulation is higher. Respectively, and they much more surpass traditional building materials in this parameter.
- Small weight. A sandwich of panels 10 times less than masonry materials have the weight of cubic meter. At the expense of it the base of the building becomes simpler and reduced the price, construction accelerates, the estimated cost of installation works decreases. During construction of buildings use of the expensive load-lifting equipment is not an indispensable condition.
- Technological effectiveness. The panel should not adjust to the sizes on the building site, they are easily mounted, do not demand additional finishing finishing of external surfaces.
- Durability. Lamels of thermal insulation have operation term not less than thirty years, at the same time there is no need to perform periodic repair work on restoration of external coverings.
Thanks to such indicators a sandwich of a lamel are in great demand at numerous consumers.