Wagon horizontal "Hozain" ISRK-12F
- BrandХозян
- Country of manufactureBelarus
- ColorGreen
- GTIN-
ISRK-12F Hozain
ISRK-12F wagon differs from the basic model for boot cutters designed for loading silage directly from the silo trenches. Extraction and loading of silage cutter by vertical layers without compromising the integrity of the surrounding layers, which protects the feed from the secondary fermentation. Reversible cutter allows loading silage trench along the entire height up to 4 meters with a capacity of not less than 3.0 tonnes in 5 minutes. milling widths of 1.5 m.
Loading silage cutter and a mixing of feed ingredients in a mixing hopper feeder occurs simultaneously. The diameter of the milling drum are arranged a special cutting knives that provide comminution and capture crop during rotation. For optimum milling mode load lowering speed is controlled by means of an autonomous hydraulic operator-controllable from the tractor cab. To download forage in the hopper feeder from both above and below the cutter has the ability to reverse rotation. When exceeding the permissible loading of more than a milling cutter, the arrow stops. In order to prevent feed loss in prigruntovom layer wagon is equipped with a dozer blade for supplying residues of the lower layer in a loading zone
That is why its use is justified for most households with medium and large number of cattle, as well as where there are increased demands on the efficiency and productivity of the process of feeding cattle.
The most extensive standard equipment!
- mixing hopper piece construction with a special protective coating;
- special TSU for reliable aggregation with tractors MTZ;
- autonomous (independent from the tractor) hydraulic system (Italy);
- remote control from the tractor cab (Italy);
- weldless spiral screw auger (Italy);
- electronic weighing system with display Russified (Italy);
- 2-speed planetary gear (Italy);
- operational documentation in Russian;
- tires or 295/80 R 22.5 265/70 R 19.5 (except ISRK-12F);
- high coupling (90 cm) with a reinforced lug;
- conveyor belt, left, right tray;
- rubber bead,
inclined inward to prevent precipitation when mixed feed;
- single-circuit pneumatic braking system;
- stainless steel knives;
- manual parking brake;
- lighting equipment.
An additional setting:
- conveyor belt;
- programmable scales;
- wide-angle drive shaft with overload clutch;
- set nastavnyh boards (2 cubic meters)
inclined inwardly, which prevents spillage of feed when mixed.
indicator | ISRK-12F |
Type of | semitrailer |
Capacity, t / Bunker capacity, cbm. | 3.5 / 12 |
Weight, no more | 5500 |
Dimensions, m, not more, LxWxH | |
when the size of tires 295/80 R22.5 | 7h2,2h2,54 |
Track width, mm | 1680 |
Clearance mm, not less than | 420 |
The maximum height of the feed cross conveyor unloading, mm | 700 |
Transport speed with / without load, km / h, max | 8/12 |
Working speed distribution of feed, km / h, max | five |
Service life, years | eight |
Hydraulic drive of the conveyor and bolts | autonomous |
drive the screws | PTO tractor |
Number / type of screw | 2 / horizontal |
Service staff | 1 tractor |
The width of the milling / cutting drum diameter, mm | 1500/500 |
Lifting cutter axis / Depth mill. layer per pass, mm | 4500/250 |
cutter rotation speed, rev / min | 0-500 |
Class / tractor power (hp), min | 1.4 / 80 |
food supply, min / max, t / h | 15/120 |