- Country of manufactureBelarus
- Kind of animalCattle
The vertical mixing units combines the latest technology, ease of maintenance and operation reliability of vertical mixing system. Due to the simplicity of the design of RB-11B "Hozain" is somewhat cheaper than units with horizontal working screws.
RB-11B - a simple, convenient and reliable unit. The mixing process it is rapid and does not alter the nutritional quality of food. Reversible conveyor allows the distribution on two sides.
The ideal design of IBS-11B
• Minimum dimensions , fit into the dimensions of a tractor MTZ-80; MTZ-82, allow the use of IBS in all farm types without further their reconstruction;
• Turboshnek with 8 blades for mixing feed components. Spiral screw 12-16mm. made by hot stamping from a hardened steel to improve stability.
• Ribbed tank. The "Master" bunker constructed by repeated bending. Increased rigidity of the structure increases the life of the product by 20%. Hopper Orebrovka inhibits food that speeds up the cooking process and allows you to grind and mix the feed ingredients, even without the aid of counter-rotating. Reduced load on the PTO that provides fuel savings of up to 20%. This design provides preparing and saving a considerable improvement in the quality of time cooked mash.
• Reduction gearing is standard and reduces the load on the PTO and the tractor makes it possible to work under optimal conditions and can significantly increase the torque on the screw;
• Weighing system with a convenient remote control, audio signals, installation of storage programs and dosing up to 1kg.
The most extensive standard equipment!
- mixing hopper piece construction with a special protective coating;
- electronic weighing system;
- robust planetary gear;
- two-speed reduction gear;
- air brake system;
- Unloading a window or a transporter to choose from;
- manual parking brake;
- axle with dual wheels 215/75 R 17.5;
- screw the parking support;
- turboshnek with 8 blades;
- Additional blade for uniform discharge;
- two mechanical anvil;
- viewing stairs;
- a safety cable on the coupling;
- lighting fixtures;
- additional knife rassekaniya rolls.
An additional setting:
- conveyor belt, height-adjustable;
- programmable scales;
- wide-angle cardan shaft;
Name pokazatelya1500 ± 50
|Weight, tons / hopper Volume, m 3||2.7 / 10|
|Weight, no more||3700 +200|
|Dimensions, m, not more, LxWxH||5,1*2,47*2,54
|Track width, mm|
|Clearance mm, not less than||300|
|drive the screws||PTO tractor|
|Number / type of screw||1 / vertical|
|PTO speed, rev / min||540|
|Bevel planetary gear unit||+|
|Reducer lowering cylinder||dual-speed|
|Screw speed, rev / min||25; 13|
|Hydraulic drive of the conveyor and bolts||tractor|
|Discharge height reversible cross conveyor on the two sides (the height of the trough), mm||750 ..... 1000|
|Unloading discharge height through window (tray), mm||750|
|Transport speed with / without load, km / h, max||8/12|
|Working speed distribution of feed, km / h, max||five|
|Service staff||1 tractor|
|Power / class tractor, min||80 / 1.4 *|
|* Depending on the type and condition of the loaded feed|