- BrandHYDROO
- Country of manufactureSpain
- The medium to be pumpedTeknisk vatten
- Typ av InstallationSurface
- ColorBlack
- GTINКомунальные сетевые циркуляционные насосы 100 куб.м. напором 48 метра 22 кВт.
- циркуляция отопления100 м.куб. в час
Vertical circulation pumps Contact tel. (099) 4524103 (067) 4662603 Price on request. Specifications: Model TDROO pumps are single - stage centrifugal pumps equipped with a standard motor and mechanical seal. Compared to other pumps of a similar design, the pump is not exposed to impurities in the pumped liquid. The pump is designed to be repaired without being disconnected from the pipeline. The mechanical seal for TF series, TX200 and above is a cartridge type mechanical seal. The motor does not need to be disassembled when replacing the mechanical seal. Fields of application: The pumped liquid is clean, non - aggressive, non - flammable and non - explosive liquid, does not contain solid particles and fibers that can damage the pump mechanically or chemically. Detailed fluid requirements are shown in Table 2. If the viscosity or density of the fluid exceeds the required level, it affects the performance curves and increases energy consumption. Liquid temperature: - 15ºC ~ 110ºC Max. pressure: standard PN 12 bar; special version PN 16 bar.
TDROO
TDROO vertical circulation pumps. Price on request
Specifications:
- Model TDROO pumps are single - stage centrifugal pumps equipped with a standard motor and mechanical seal. Compared to other pumps of a similar design, the pump is not exposed to impurities in the pumped liquid.
- The pump is designed to be repaired without being disconnected from the pipeline.
- The mechanical seal for TF series, TX200 and above is a cartridge type mechanical seal. The motor does not need to be disassembled when replacing the mechanical seal.
Applications:
- The pumped liquid is clean, non - corrosive, non - flammable and non - explosive liquid, does not contain solid particles and fibers that can damage the pump mechanically or chemically.
- Подробные требования к жидкости приведены в таблице 2. Если вязкость или плотность жидкости превышают требуемый уровень, то это влияет на кривые производительности и увеличивает потребление электроэнергии.
- Температура жидкости: - 15ºC~110ºC
- Макс. давление: стандартное исполнение PN 12 бар; специальное исполнение PN 16 бар.