Welding head of P700 CRC-Evans
- Customer pickup,
- Courier
- In detail
- ManufacturerCRC-Evans
- Country of manufactureUnited States
The automatic machine for welding is intended by the melting electrode in the environment of protective CRC-Evans P700 gas for welding of all layers of a seam of not rotary ring butt connections of pipes. For installation of a welding head on a pipe the directing belts (bandages) on concrete diameter are used. There are directing belts of various designs allowing to establish a head on a pipe without isolation and with various types of insulating covering.
Use of the two-arc automatic machine allows to carry out welding root, filling and facing layers at the same time two arches. Welding of the filling layers usually is carried out in the way 2 layers for 1 pass. Welding of a facing layer is usually carried out in 2 rollers.
As welding sources modern digital welding Fronius TPS-5000 or Lincoln PowerWave S350 inverters are used.
- possibility of welding by the melting electrode a wire of continuous section in the environment of protective gases (GMAW, GMAW-P, STT GMAW) of a provolokama with a diameter from 0,9 mm (.035) to 1,2 mm (.047);
- digital input and management of the welding modes;
- system of automatic tracking a torch departure;
- system of automatic tracking cutting;
- possibility of input of the modes depending on spatial situation on a pipe;
- conclusion of the modes of welding in real time for the digital display or record in internal memory with the set step;
- the gas valve with a possibility of connection of 2 types of protective gas;
- strong and reliable design;
- possibility of copying of the modes of welding between automatic machines;
- protection of the modes of welding against changes by a digital key.
Are included in the package:
- 2 automatic welding heads of P700 for welding clockwise (CW) and counterclockwise (CCW);
- 2 consoles of management with the giving mechanisms, cases for installation of coils with a wire, controllers for management of welding sources * and gas valves, power supply units 110-220B;
- 4 gas reducers with heating on 220B;
- sets of cables and gas hoses;
- 2 blocks of cooling of welding torches.
* - in a standard set there is a controller for management of welding sources of Fronius TPS-5000. The controller for welding by sources of Lincoln PowerWave S350 is bought in addition.
Technical characteristics Length is 19 inches (483 mm) Width of 13,5 inches (343 mm) Height is 17 inches (432 mm) Weight is 33 pounds (15 kg) The torch course on a vertical axis 2 inches (50,8 mm) Food of a head 36B Frequency of fluctuations of a torch of 0 - 220 min.-1 Amplitude of fluctuations of a torch 0 - 2" (0 - 50,4 mm) Delay time on edges 0 - 2,0 sec. Adjustment of an angle of installation of a torch ± 10 ° Speed of giving of a wire 100 - 600 inch/min. (254 - 1524 cm/min.) Welding speed 5 - 60 inch/min. (0,127 - 1,52 m/min) Accuracy of the sensor of spatial provision of a head ± 1 ° The possibility of connection of the accumulator 24B of a welding tractor for food of a head Is The volume of cooling liquid on one head 2 gallons (7,87 l) Operation temperature from - 40 °C to + 70 °C Compatible power supplies Fronius TPS-5000, Lincoln PowerWave S350 Service life is unlimited and makes not less than 6 years