(View map)
- BrandKazstanex
- Country of manufactureBelarus
The manual car for processing of an edge of BM - 16
[The device serves for processing of an edge of a leaf in range of corners from 20 ° to 65 ° and "b" up to 16 mm wide]
The manual car for processing of an edge of BM - 16
Appointment
The device serves for processing of an edge of a leaf. Thanks to simplicity in service and to use of the tool with the high cutting properties the car provides high - performance and effective processing of an edge of a leaf in the range of corners from 20 ° - to 65 ° - and "b" wide up to 16 - mm, and also a curve with radiuses of R3, R4 - and R5. The car for processing of an edge of BM - 16 - does possible processing of an edge of pipes and internal radiuses from 40 - mm.
This car is intended only for processing of details from steel, aluminum alloys, copper and artificial materials when using the corresponding tool. Use in other purposes does not guarantee normal work and deprives of a guarantee of the producer.
| Technical characteristics: |
| Power supply | 220 - 240 - / / 50 - 60 - |
| Power | 2200 - |
| Turns | 1800 - 5850 - |
| Degree of protection | IP 20 - |
| Isolation class | II |
| Noise level | sogl. State standard specification 12.2.030 - 2000 - |
| Vibration characteristics | sogl. State standard specification 17770 - 86 an operating mode repeatedly – short - term PV of 80% |
| Productivity | to 2 - м / mines |
| I will eat facets radius | R3, R4, R5 - |
| Leaf thickness | from 1,5mm |
| Processing of internal radius | from 40 mm |
| Maximum width of a facet | 16 - |
| Loading | 0,5 - 10 - * * * * * * |
| Angles of removal of a facet | 20 ° - 22.5 ° - 30 ° - 37.5 ° - 45 ° - 50 ° - 55 ° - 60 ° - 65 ° - |
| Sizes | 585 - 156 - - x 238 - mm |
| Weight | from 10 - kg |
-
| Technical characteristics: |
| Power supply | 220 - 240 - / / 50 - 60 - |
| Power | 2200 - |
| Turns | 1800 - 5850 - |
| Degree of protection | IP 20 - |
| Isolation class | II |
| Noise level | sogl. State standard specification 12.2.030 - 2000 - |
| Vibration characteristics | sogl. State standard specification 17770 - 86 an operating mode repeatedly – short - term PV of 80% |
| Productivity | to 2 - м / mines |
| I will eat facets radius | R3, R4, R5 - |
| Leaf thickness | from 1,5mm |
| Processing of internal radius | from 40 mm |
| Maximum width of a facet | 16 - |
| Loading | 0,5 - 10 - * * * * * * |
| Angles of removal of a facet | 20 ° - 22.5 ° - 30 ° - 37.5 ° - 45 ° - 50 ° - 55 ° - 60 ° - 65 ° - |
| Sizes | 585 - 156 - - x 238 - mm |
| Weight | from 10 - kg |
-
Removal of an edge
Removal of a facet
Sizes
-
Basic complete set- Box metal
- VM - 16 car
- Key flat unilateral s=32
- Key six - sided s=5
- Key six - sided s=14
- Torx T15 key
- Operation manual
- GLW - 000011 the mill Case for removal of a facet
- PLY - 000159 the Plate the cutting R3 (4 pieces are necessary)
- PLY - 000160 the Plate the cutting R4 (4 pieces are necessary)
- PLY - 000161 the Plate the cutting R5 (4 pieces are necessary)
- KRP - 000050 Case of a mill R3, R4
- KRP - 000051 R5 mill Case
- GLW - 000016 — - The mill case under 20 ° -
- GLW - 000010 — - The mill case under 22,5 ° -
- GLW - 000005 — - The mill case under 30 ° -
- GLW - 000009 — - The mill case under 37,5 ° -
- GLW - 000006 — - The mill case under 45 ° -
- GLW - 000017 — - The mill case under 50 ° -
- GLW - 000008 — - The mill case under 55 ° -
- GLW - 000007 — - The mill case under 60 ° -
- GLW - 000018 — - The mill case under 65 ° -
- PLY - 000162 the Plate cutting for removal of a facet — - standard
- PLY - 000195 the Plate cutting for removal of a facet – for aluminum (5 pieces are necessary)
-
