Pipe-threading C10T.10, C10T.12 machines

Technical characteristics

BrandKazstanex
Country of manufactureBulgaria

Description

Pipe-threading C10T.10, C10T.12 machines
[O obr. 800 mm, GAP of 990 mm, RMTs 1500 - 6000, kW 15]

Are intended for turning of pipes and details of pipe connections, mainly in oil and gas branch. Pipe-threading machines are equipped with two three-cam cartridges, a conical ruler and two lunettes on external racks. The pipe-threading machine can be used for performance of various turning works, including cutting metric, inch, modular and pitchevy carvings. -

Technical characteristics:
Technical characteristics			C10T.10 -	C10T.12 -
Key parameters	Height of the centers	mm	400 -
-	Diameter of processing over a bed	mm	800 -
-	Diameter of processing over a support	mm	560 -
-	Diameter of processing over dredging in a bed	mm	990 -
-	Width of guides	mm	560 -
-	Distance between centers	mm	1500, 2000, 3000, 4000, 5000, 6000 -
Spindle	Forward end	No	12 -
-	Diameter of an opening of a spindle	mm	260 -	320 -
-	Conical opening of a spindle	Metric	318 -
Forward grandma	Number of speeds of a spindle	-	12 -
-	Range of turns	rpm	8 - 400 -	10 - 480 -
-	Diameter of a cartridge / opening	mm	580/270 -	630/320 -
-	Power of the main drive	kW	11 - (15)	15 -
Giving	Number of giving	-	152 -
-	Range of longitudinal giving	mm / about	0,039 - 15,0 -
-	Range of cross giving	mm / about	0,02 - 7,5 -
Carving	Quantity of carvings	-	76 -
-	Step of a millimetric carving	mm	0.5 - 150 - - -
-	Step of an inch carving	Vit / 1 -	60 - 1/5 - - -
-	Step of a modular carving	mm	0.125 - 37.5 - - -
-	Step of a diametrical carving	DP	240 - 4/5 - - -
Movements	Course of a cross sled	mm	410 -
-	Course of the top sled	mm	150 -
Pintle	Diameter pintles	mm	105 -
-	Cone pintles	Morse	No. 6 -
-	Course pintles	mm	225 -
Weight	For RMTs 2000 - mm	kg	6000 -	6100 -

-

Technical characteristics:
Technical characteristics			C10T.10 -	C10T.12 -
Key parameters	Height of the centers	mm	400 -
-	Diameter of processing over a bed	mm	800 -
-	Diameter of processing over a support	mm	560 -
-	Diameter of processing over dredging in a bed	mm	990 -
-	Width of guides	mm	560 -
-	Distance between centers	mm	1500, 2000, 3000, 4000, 5000, 6000 -
Spindle	Forward end	No	12 -
-	Diameter of an opening of a spindle	mm	260 -	320 -
-	Conical opening of a spindle	Metric	318 -
Forward grandma	Number of speeds of a spindle	-	12 -
-	Range of turns	rpm	8 - 400 -	10 - 480 -
-	Diameter of a cartridge / opening	mm	580/270 -	630/320 -
-	Power of the main drive	kW	11 - (15)	15 -
Giving	Number of giving	-	152 -
-	Range of longitudinal giving	mm / about	0,039 - 15,0 -
-	Range of cross giving	mm / about	0,02 - 7,5 -
Carving	Quantity of carvings	-	76 -
-	Step of a millimetric carving	mm	0.5 - 150 - - -
-	Step of an inch carving	Vit / 1 -	60 - 1/5 - - -
-	Step of a modular carving	mm	0.125 - 37.5 - - -
-	Step of a diametrical carving	DP	240 - 4/5 - - -
Movements	Course of a cross sled	mm	410 -
-	Course of the top sled	mm	150 -
Pintle	Diameter pintles	mm	105 -
-	Cone pintles	Morse	No. 6 -
-	Course pintles	mm	225 -
Weight	For RMTs 2000 - mm	kg	6000 -	6100 -

-

Basic complete set

Standard complete set:
Main engine of 11 kW
Electrodynamic brake
Electric equipment with the control panel
The cooling system with a pomp
Working light
The accelerated course
GAP
Two 4th cam turning boss f 630 mm with independent movement of cams
Back board on all length of the machine
Protection of the boss
Protection of a reztsederzhatel
One-position longitudinal limiter
Replaceable cogwheel
Set of belts
Bolts and washers for leveling
4th a position reztsederzhatel with a key
Portable lunettes on racks (2 pieces) of 120 - 320 mm
Conical ruler
Reducer pintles of the back grandma
Set of keys
The operation manual in Russian
It is packed on the pallet, covered with polyethylene
Standard color

-

Contact the seller

Pipe-threading C10T.10, C10T.12 machines

Company rating