Milking DeLaval P2100 hall of parallel type

• From 1x3/3 to 2x28/56
• Exit/indexing of the side of the hall
• Exit on sections/indexing on sections (by the separate order)
• Width of a stall is 28 inches (711 mm)

Compact and effective

The milking DeLaval P2100 hall of parallel type is intended for efficiency increase. It provides the high capacity and fast milking, and also allows to pass quickly from one group of cows to another. The compact design relieves cows and personnel of walking on long distances, and also helps to keep expenses on construction under control. The milking DeLaval halls of parallel type are equipped with systems of air-controlled indexing. After the end of milking of group the group is issued through pneumatic the operated forward exit.

Cervical emphasis

Cervical emphasis in the milking P2100 hall copes pneumatics that on the one hand provides necessary effort for fixing of cows, and with another, excludes potentially dangerous electric drives. A cervical emphasis represents the design opened from below with accurate positioning of animals. Thanks to it cows feel naturally and freely, taking milking places. They do not have need to raise the head over a horizontal beam or to get into a narrow frame. This feature reduces time spent by animals for an entrance to the milking hall, reduces a stress at animals and increases capacity.

Process and functionality

High degree of functionality of a design of the milking DeLaval P2100 hall of parallel type is looked through literally in everything: from the top cases of automation to a fringing of a milking hole. Thanks to it fast cleaning when which performing the vital details disappear that provides their reliable protection is reached. The strong frame is calculated on long-term operation, and the system of pneumatic management of the milking hall is reliable and simple in service. The top and lower cases of automation, and also a fringing of a milking hole are made of stainless steel.

Comfort and productivity

The attention to each trifle capable to save precious seconds when milking big pogoloviya is the cornerstone of the concept of stalls of the P2100 hall. In particular, Delaval is one of features of stalls of the parallel P2100 type of the company reduction of time for change of groups in the milking hall. It is enough to cows to take one-two steps forward, and the closed dividing gates form a physical barrier, allowing to start the following group.

Standard equipment:

• Possible sizes: from 1 x 3 to 1 x 16, from 2х3 to 2х28
• Distance between cows: 711 mm (28 inches)
• Groups of 3 or 4 cows (group of 2 cows for the hall of 1 x 5 in size and D-5)
• Frame design from zinced with immersion in fusion became with bolted fastenings of the basic hinged elements
• It is calculated on milking during till 12-14 o'clock in day
• The smooth rounded surfaces for safety of personnel and animals
• Movable entrance gate
• Broad passes for cows from an entrance to milking stalls
• Galvanized dividing gates of consecutive action with internal returnable springs
• Big radius at gates of consecutive action, provides fast and comfortable turn of cows on 90 ˚
• The strong galvanized cervical emphasis having the design opened with a bottom
• Management of stalls of the milking hall by means of compressed air
• Air pressure for a cervical emphasis, indexings of cows and entrance gate are regulated independently
• Exit of the side of the milking hall: at the same time all cows who are on one party are issued
• Indexing of the side of the hall: all cows who are on one party nestle on the protective back screen and towards the operator.
• The vertical filter from stainless steel with the built-in tray for collecting manure and protection of the operator against lyaganiye.
• The filter and fringing are executed from the sheet of stainless steel 3.2 mm thick

Additional equipment of the milking hall of general purpose

• The cases of automation of the panel of illumination of a workplace which are built in over top operators
• Complete set for an open hole
• Complete set for a milking hole with the cellar
• Purge of highways from a molokopriyemnik to the refrigerating tank compressed air

The equipment delivered by the separate order:

• Exit on sections: cows are issued subgroups on 3-4 cows on each party
• Indexing on sections: cows are drawn in towards the operator and the filter by groups on 3-4 cows
• Nozzles for the organization of washout of a floor of a platform of cows after each group
• The top and lower cases of automation from stainless steel

Milking automation options

• The automatic removal of suspended part MPC150 which is built in a case of automation or without it
• Automatic removal of suspended part MP400 with own vertical casing
• Controllers for work with a control system of herd of MPC580/680 of the top case of automation or without it. The quantity and combinations can be chosen proceeding from needs and for a combination with sensors of a stream and counters of milk:
  • MPC150: HFC, FI2, FI7
  • MP400: FI2, FI7, MM27
  • MPC580/680: FI2, FI7, MM15, MM27
• Function of start of milking by means of comfortable start or remotely
• The folding nests of washing of suspended parts which are built in the lower case of automation or separate