Double rotational Revent 724 furnace

Standard features:
> Revent TSS System
> Revent HVS System
> Revent LID System
> Compact cross
heat exchanger
> Revent wedge - shaped adjusting system
> Faultless steel structure
> Digital panel of management - IAC Automatic steam control
> Double glass of door
Requirements for installation:
Electric equipment
> the most widespread types of 3 - phase food
Water and waste
> Water supply: outside
diameter 1/2" 4,5 kg/cm2 (450 kPa)
> Waste: 1" connection (additional connection on the right side)
Ventilation:
> The channel of excessive pressure from doors to extract
> The exhaust gate of the furnace - is connected to cap
> Exit of gases - Ø 168 mm (only for
liquid - fuel and gas heaters)
> Cap opening: 280х305 mm
Technical information:
> Maximum thermal power: see the plate
> Temperature: 50 - 300 °C
> Gross weight when transporting: 1840 kg *
> The hatch through passage for installation:
875 x 1750 mm (by delivery in three parts) 1760 x 2510 mm (by delivery of the assembled furnace)
> The minimum height for installation of the furnace (canting) - 2700 mm
> Diameter of turn: 1280 mm
> Maksinalny loading of raising of the cart or platform: 400 kg
> Steam formation: 8,5 l / 20 sec.
> Trebovoniya on installation: The furnace has to be installed on horizontal, not flammable floor. The furnace can be installed closely to wall - only front and upper parts have to be open for access. The space over the furnace needs to be aired (to use the fan) that temperature has not exceeded 50 °C. At such temperature electric parts can be exposed to damage.