Currency UZS
Chemical pump HP 160/49 buy in Tashkent
Buy Chemical pump HP 160/49
Chemical pump HP 160/49

Chemical pump HP 160/49

In stock
Reconfirm the price with seller
Shipping:
Seller
Uzbekistan, Tashkent
(View map)
+998 
Display phones
Description
Chemical semisubmersible "HP" pumps

Units semisubmersible the HP type are intended for pumping of chemically active and neutral liquids with a density no more than 2000 kg/m ³ at n=1450 of rpm and no more than 1750 kg/m at n=2900 of the rpm having firm inclusions up to 0,2 mm in size, volume concentration of which does not exceed 0,1%, with a temperature from 233 to 363 To (from - 40 ° to + 90 °C), kinematic viscosity to 30*10-6 sq.m / with in which corrosion firmness of materials of flowing part with 10 on 4 point on a ten-mark scale of corrosion firmness of materials in accordance with GOST 13819-68.

Pumps HP belong to products of group II, a type of products I (restored) in accordance with GOST 27.003 and categories of placement 2.3 are issued in a climatic modification "At"; upon the demand of the customer in a climatic modification of "T" - for units with a symbol on material E, I, K.

The drive in HP 45 54, HP 90 33, HP 160 49, HP 280 42 units are the electric motors of common industrial execution placed on a support (rack).

Units of common industrial execution are not allowed to be established and operated in vzryvo-and fire-dangerous productions and to use them for pumping of combustible and flammable liquids.

Pump identification number at the order and correspondence:

HP 45/54-K-SD-U2, where

  • HP - submersible vertical with support in the pumped-over liquid;
  • 45 - giving, m3/hour;
  • 54 - pressure, m;
  • To - material of flowing part;
  • SD - an example consolidation of a shaft (double stuffing);
  • At - a climatic modification;
  • 2 - category of placement of the unit at operation.

At installation in the pump of the driving wheel with the turnings ensuring functioning in the middle or lower part of the field "Q-H" in designation after the figures specifying the nominal diameter of the driving wheel the letter "and" or "b" is added respectively. Application of the letter "d" means operation of the unit with a pressure above nominal.

Identification number:

HP 45/54 and K-SD-U2

At execution of flowing part of the pump from material "P" of the designation "and", "b" are not applied.

For an exception of possible malfunctions of consolidations at operation of pumps the Customer has to define type of consolidation of a shaft of the pump, proceeding from opportunities of use of materials of consolidation in the concrete environment which is pumped over by the ordered unit.

Materials of the main details of chemical semisubmersible pumps HP

Name of details Material for executions
To E And T
Driving wheel 12H18N9TL

GOST 977-88

12H18N12MZTL

GOST 977-88

07HN25MDTL

TU 26-06-1414-84

Titan of TL3

OST.5R.9071-88

Pump housing
The knee is pressure head
Shaft

The plug is protective lower

Steel 12X18H9T -

GOST 5949-75

Steel

10X17H13M2T -

GOST 5949-75

Steel

06HN28MDT -

GOST 5949-75

Titan of TL3

OST.5R.9071-88

The cover which is soaking up

The suspension bracket is top

The suspension bracket is lower

Steel 12X18H9T -

GOST 5949-75

Steel

10X17H13M2T -

GOST 5949-75

Steel

06HN28MDT -

GOST 5949-75

Titan of TL3

OST.5R.9071-88

Rack St of 3 GOST 380-2005

Parameters of pumps are specified in tab. 2

Standard size Giving, m3/h (p/a) Pressure, m Frequency of rotation, rpm Pump power. kW Cavitational stock, m K.p.d.

pump, %

not less

Current frequency,

Hz

Chain tension

In

HP45/54 45 (12,5) 54 48 (2900) 13.2 5 50 50 380
HP90/33 90 (25) 33 48 (2900) 13.9 6 50 50 380
HP90/49 90 (25) 49 48 (2900) 18.5 6 65 50 380
HP160/49 160 (45) 49 24 (1450) 31.4 4 65 50 380
HP280/42 280 (78) 42 24 (1450) 46 6 65 50 380

Operation of pumps is allowed in a working interval of pressure head characteristics of the concrete pump.

Production tolerances on a pressure on the nominal mode ± 5%.

The pressure head characteristic of the pump is given at liquid supply by density ρ = 1000 kg/m3, at nominal rates of Q, H?, at a complete set the engine with a power providing k.p.d the pump according to the table No. 2.

The weight, the overall and connecting dimensions have to correspond to drawings and be specified in operational documentation.

Indicators of reliability of pumps HP

  • the established trouble-free operating time, not less than 5000 hours;
  • the established resource before capital repairs for neutral liquids, not less than 20000 hours;
  • the established resource before capital repairs for chemically active liquids, not less than 1700 hours;
  • established period of service before write-off not less than 3 years.

Criterion of the established trouble-free operating time is decrease in a pressure by 10% owing to increase in gaps of hydraulic consolidations.

Criterion of the established resource before capital repairs is decrease in a pressure by 15% owing to wear of a pump housing and the driving wheel.

Pumps of each standard size are completed with electric motors, various on power, depending on density of the pumped-over liquid. Overall and connecting dimensions electric pump agregatovkhp 45/54 and HP 90/49


Standard size Electric motor N, kW L l l1 l2 D D1 D2 D3 D4 n Weight, kg
HP 45/54 VAO-B2-2 17 3209 2032 160 18 72 80 160 195 138 4 610
HP 45/54 BAO-71-2 22 3185 2032 160 18 72 80 160 195 138 4 680
HP 45/54 BAO-72-2 30 3260 2032 160 18 72 80 160 195 138 4 715
HP 45/54 B160M-2 18.5 3190 2032 160 18 72 80 160 195 138 4 650
HP 45/54 B180S-2 22 3250 2032 160 18 72 80 160 195 138 4 670
HP 45/54 B180M-2 30 3290 2032 160 18 72 80 160 195 138 4 745
HP 45/54 4A160M2 18.5 3170 2032 160 18 72 80 160 195 138 4 560
HP 45/54 4A180S2 22 3160 2032 160 18 72 80 160 195 138 4 585
HP 45/54 4A180M2 30 3200 2032 160 18 72 80 160 195 138 4 605
HP 90/49 BAO-71-2 22 3260 2057 150 22 83 100 180 215 158 8 693
HP 90/49 BAO-72-2 30 3260 2057 150 22 83 100 180 215 158 8 738
HP 90/49 BAO-81-2 40 3326 2057 150 22 83 100 180 215 158 8 858
HP 90/49 B180S-2 22 2057 150 22 83 100 180 215 158 8 683
HP 90/49 V180I-22 30 2057 150 22 83 100 180 215 158 8 758
HP 90/49 B200L-2 45 2057 150 22 83 100 180 215 158 8 838
HP 90/49 4A180S2 22 2057 150 22 83 100 180 215 158 8 698
HP 90/49 4A180I2 30 2057 150 22 83 100 180 215 158 8 618
HP 90/49 4A200L2 45 2057 150 22 83 100 180 215 158 8 613


Overall and connecting dimensions of the HP 160/49 and HP280/42 electric pump units


Standard size Electric motor N, kW L I 11 D D1 D2 D3 D4 D5 D6 D7 D8 d Weight, kg
HP 160/49 BAO-81-4 40 3510 2067 22 160 210 420 490 245 210 125 188 810 18 1092
HP 160/49 VAO-82 55 3550 2067 22 160 210 420 490 245 210 125 188 810 18 1150
HP 160/49 B200L-4 45 3570 2067 22 160 210 420 490 245 210 125 188 810 18 1564
HP 160/49 B225M-4 55 3610 2067 22 160 210 420 490 245 210 125 188 810 18 1440
HP 160/49 B250S-4 75 2067 22 160 210 420 490 245 210 125 188 810 18 1670
HP 160/49 4A200L4 45 3510 2067 22 160 210 420 490 245 210 125 188 810 18 1295
HP 160/49 A225M4 55 3520 2067 22 160 210 420 490 245 210 125 188 810 18 1257
HP 160/49 4A250S4 75 3600 2067 22 160 210 420 490 245 210 125 188 810 18 1425
HP 280/42 BAO-82-4 55 3550 2085 24 200 240 460 470 310 270 175 242 860 22 1426
HP 280/42 B225M-4 55 3630 2085 24 200 240 460 470 310 270 175 242 860 22 1626
HP 280/42 B250S-4 75 2085 24 200 240 460 470 310 270 175 242 860 22 1856


Overall and connecting dimensions of the HP 90/33 electric pump units


Standard size Electric motor N, kW L Weight, kg
HP 90/33-2.8 4AM180S2 22 4250 570
HP 90/33-2.8 4AM180M2 30 4290 590
HP 90/33-2.8 AIM180S2 22 4125 570
HP 90/33-2.8 AIM180M2 30 4170 650
HP 90/33-2.8 4A180S2 22 4190 520
HP 90/33-2.8 4A180M2 30 4230 540
Contact the seller
Chemical pump HP 160/49
Chemical pump HP 160/49
Shipping method
Compare0
ClearSelected items: 0