CAR OF THE PIPES GAKS-M-325/1420 OF FLAMELESS CUTTING
- Customer pickup,
- Transport company
- In detail
IT IS INTENDED FOR CUTTING OF PIPES WITH SIMULTANEOUS CUTTING OF EDGES UNDER WELDING BY THE LEZVIYNY CUTTING TOOL
● it is applied in field conditions at construction and repair of the main and technological pipelines when application of ardent cutting is impossible.
● Are operated in the explosive zones V - 1g, in the conditions of a temperate climate (execution At), category of placement 1 in accordance with GOST 15150 - 69.
● the Independent electric drive for movement of the car around a pipe.
● began Ensuring convergence also the end of a cut due to use of the chain drive consisting of two single - row chains receiving the movement from the driving asterisks located on one leader to a shaft.
● the Possibility of smooth regulation of speed of movement of the car and selection of the modes of cutting when using the frequency converter.
● the Powerful mechanism of a tension of a chain providing stability of the car when cutting a pipe.
THE MECHANISM OF ROTATION OF THE CUTTING TOOL
● the Independent electric drive for rotation of the cutting tool.
● the Cutting tool:
— a special mill for cutting of an edge at an angle 30? , welding, necessary for the majority of ways;
— a detachable mill for cutting of pipes.
● mill Material from high - quality quick cutting steel.
● Independent cooling system of a mill. *
INSTALLATION AND MANAGEMENT
● the Minimum time of installation - no more than 10 minutes.
● It is completed with the remote control of management.
● Application of the directing templates for obtaining full convergence of a cut of pipes with defects of a surface. *
● High reliability and safety of operation of the machine:
— two independent electric drives;
— use of electric motors of three - phase current in hardened execution.
|Outer diameter of the cut pipes, mm||325 … 1420|
|Thickness of a wall of the cut pipes, mm||to 16|
|Discrepancy of the beginning and end of a cut, mm||no more than 2|
|Bevel angle under welding, a hail.||30|
|The maximum depth of cutting for one pass, mm:|
|— special mill 140х25||9|
|— detachable mill 160х25||12|
|Time of a cut of a pipe, mines: ? 325/? 820/? 1220/? 1420||32,7 / 82,5 / 122,8 / 142,98|
|Working space around a pipe, mm||670 … 680|
|Power of the electric motor, kW||0,25|
|Regulation of speed of movement of the car||smooth, stepless|
|Mid - flight speed of movement of the car, mm/min.||178,5|
|The cutting speed recommended mm/min.||35,5|
|The mechanism of rotation of the cutting tool|
|Power of the electric motor, kW||1,5|
|Frequency of rotation of the cutting tool, rpm||48,8|
|Giving of the cutting tool||manual|
|Overall dimensions of the car (L? B? H), mm||835х510х542|
|Mass of a running gear of the car, kg||226|
* Completeness of delivery is defined by the Customer (the tool, the independent cooling system directing templates.