UTP 8 electrode, analog of OZCh-4 for cold welding and a naplavka of cast iron
- Customer pickup,
- Courier
- In detail
- Country of manufactureGermany
UTP 8 electrodes (analog of electrodes of OZCh-4) — it is low - a hydrogen electrode for cold welding of cast iron: gray, malleable, high-strength and cast staly, for welding of cast iron from a stalyama, copper and copper alloys. It is especially recommended for single-pass welding and drawing the first layer on cast iron at multilayered welding. Allows to weld old and greasy cast iron at restoration and repair.
The electrode of UTP 8 has excellent welding characteristics. The high-quality covering allows to carry out welding without spraying and to control a welding bathtub. The welding seam and near a sutural zone have high plasticity and can be processed by a file. When processing by the metal-cutting tool on border cast iron - the built-up metal is not formed "step".
The electrode of UTP 8 possesses a stable arch and provides the flat structure of a seam excluding undercuts. It is especially good at the combined welding about iron the nickel electrode of UTP 86 FN used as filling at multilayered welding.
Mechanical properties of metal of a seam:
Nickel (Ni) | Iron (Fe) | Carbon (C) |
basis | 0,5% | 1,2% |
Universal application. Welding on a direct current of direct polarity (-) on an electrode.
Welding on alternating current is possible.SIZES, WELDING CURRENT:
Temporary resistance to a gap: | Fluidity limit | Relative lengthening | Hardness |
Gv> = 490 MPas | Gt> = 220 MPas | > = 30% | 175 HB |
Technology of welding: Depending on wall thickness to do cutting of U - figurative or if the reverse side, double U - figurative is available.
The zone of welding has to be previously rather widely cleared, an electrode to hold a vertical - but, to keep a short arch. Thickness of the roller is no more than 2 diameters of the core. Roller length for one pass no more than 10 diameters of an electrode. To delete slag right after drawing the roller and to make pro-forging. To maintain intermediate temperature not above 80ºС.
To make renewal of an arch on a welded seam, but not on the main metal.
Producer: "UTP Schweissmaterial GmbH" Germany.
Diameter, mm | Length, mm | Range of welding current, And | Packing and packing |
2,5 | 300 | 60 - 80 | 4 packs on 4,5kg in a cardboard box (18 kg) |
3,2 | 300 | 80 - 100 | 4 packs on 5,5kg in a cardboard box (22 kg) |
4,0 | 400 | 110 - 140 | 4 packs on 5,2kg in a cardboard box (20,8kg) |