- Country of manufactureBelarus
Diskatora are ideally suited for preseeding processing of the soil, for cutting of layers of the soil after plowing of meadows and pastures, a fast, surface treatment of an eddish with intensive mixing (hulling), smoothly work even at a large amount of straw. Processing of corn fields with a large amount of straw and an eddish, a perepashka of fodder grounds and recultivation of vapors, preseeding preparation and seal of liquid manure, alignment and prikatyvany surfaces of the field, creation of the mulching layer, prevention of a wind and water erosion, and also during the work on a sternevy background
providing enough high indicators are additional opportunities of units soil-cultivating disk productions of JSC Bobruyskselmash. Ensuring simultaneous performance of two operations: the disking of the soil and a preseeding prikatyvaniye, creates an opportunity to make crops of various cultures.
The wide range includes hinged, semi-hinged and hook-on models with a width of capture from 2 to 7,5 meters and allows to use optimum your new soil-cultivating unit taking into account features of your district.
Feature of APD-7,5M-1 and APD-6 cars is that units have the main frame and additional wings connected to the main frame through system of hydraulic cylinders. It provides independent movement of wings the friend rather each other at roughnesses of the processed surface that promotes keeping of depth of processing of the soil.
APD-7,5M-1 and APD-units 6 can be used for crops of intermediate melkosemenny cultures at an agregatirovaniye with a seeder of Euro-Turbo-Jet "Super-10"
Working bodies of units are equipped with cut spherical "camomile" disks with a diameter of 560 mm, 6 mm thick. The angle of attack of disks allows them easier to enter the soil, providing at the same time intensive hashing of the soil and the pozhnivny remains. Disks get into the soil on depth from 5 to 16 cm.
Each disk of the unit is established on an individual rack that allows the unit to work at fields with a large number of the vegetable remains and weeds, excepting winding of the vegetable remains on an axis of a disk and clogging of interdisk space, and also provides high maintainability of the unit. They are used, for example, when processing corn straw and an eddish, a perepashka of fodder grounds and recultivation of vapors. Depending on service conditions wear of a disk makes 10 mm. on 2 500 hectares.
Units soil-cultivating disk are equipped with individual protection which is provided with system from four rubber blocks shock-absorbers (dampers) by means of which everyone a drain with a disk individually fastens on a frame, to the allowing disks to move in case of collision with an obstacle as each disk reacts independently, the working depth of all car does not change. Each disk individually copies a soil relief better, crushes the soil better, due to the additional vibration created
shock-absorbers, than by cars with rigid fastening of disks so traces of a tractor are not just filled up with the soil, and are actually processed. So, even at roughnesses on a surface of the soil it is possible to carry out a uniform surface treatment. The individual suspension bracket of disks – without uniform shaft – also provides optimum passing of the soil and the vegetable remains. Elastic rubber shock-absorbers (damper) on each disk serve not only for optimum copying of a contour of the soil, but also as the safety mechanism for separate disks. Large-size rubber dampers do not demand maintenance and differ in the big course that prevents blows about a frame.
Thus, application of a suspension bracket of working bodies / are resistant of a disk / on rubber shock-absorbers (dampers) allows to copy optimum the soil and to protect the unit from stones.
The angle of attack of forward and back batteries of disks makes 15 °. It promotes a raising of the soil and the vegetable remains in air from the forward battery of disks to back and provides the first-class hashing. Unlike disks with a flat arrangement, here the angle of emission is much less. So, the soil with the vegetable remains rises in air, mixes up and again keeps within under a skating rink.
One of the main advantages of units soil-cultivating disk productions of JSC Bobruyskselmash is application of reliable bearing knot of production SKF (Sweden) either FKL (Serbia), or own production providing a guarantee for a product exit out of operation at an equipment operating time to 10 thousand hectares.
The knot of the bearing of own production represents especially strong naves - disks with use of dual radial-stop bearings (roller radially persistent two-row bearing 537908 or ball radially persistent two-row bearing 256908) with the effective six-level pylevlagozashchity, being own development of the JSC Bobruyskselmash enterprise. It is unattended therefore after filling by oil for all term of operation it is possible to refuse a press butterdish.