- Country of manufactureBelarus
- it is made on the basis of fabric of viscose industrial thread (carbonization, further - activation).
- much HIGHER DYNAMICS of SORPTION in comparison with active coals
- effectively works in low concentrations (at the level of maximum concentration limit below)
- appearance: textile material in the form of tapes, fabrics, nonwoven fabric (karbopon-Aktiv)
- it is convenient in operation, it is easily regenerated
- material thickness in limits 0,2-1,5mm; nonwoven fabric (felt) the 2-4th; tape width the 20-150th, fabrics - the 400-600th; surface density 100-900ú/sq.m.
- specific surface on sq.m/g BET 500-1500; the volume of time are 0,3-0,8 cm3/g.
APPLICATION. Examples of use are based on information which is available for us now. Unique properties of material constantly expand its application. That is why close cooperation between us and our clients is important.
- The filter material for traps of organic impurity from technology solutions and drain waters (especially in the field of low concentrations);
- Devices for recuperation of organic solvents (dichloroethane, gasoline, acetone, etc.);
- Purification of galvanic solutions of organic impurity; Oil traps for gas station, car washes, oil territories. After thin cleaning the content of oil products in water corresponds to strict ecological standards;
- Systems of purification of air and absorbers of smell; Supercondensers on double electric layer: ionistor (EDLC);
- Filters for production of drinking water (VIP-filters, after-treatment stage);
- Sorption filtering medium for production of means of individual protection (SIZ and SIZOD) and overalls for work in the conditions of contact with SDYaV;
- The filter material for gas purification during the welding works;
- The filter material for smoking rooms; use in cigarette filters;
- Absorption of smell in refrigerators;
- Highly effective cleaning in production of alcoholic beverage products and citric acid.
|THE SPECIFICATION ON FABRIC "BUSOFIT"|
|.||Busofit - T-1||Busofit - T||Busofit - TM-4|
|Surface density, g/m2||140 ± 20||110 ± 20||240 ± 25||200±25||190 ± 30||790+50||740+50|
|Content of ashes, %, no more||0,5||0,5||0,5||0,5||0,5||0,5||0,5|
|Breaking weight on basis, N, not less||
49 ± 3
||48+3||49 ± 3||48 ± 3||48 ± 3||49+3||48+3|
|The adsorptive activity on methylene
blue, mg/g, not less
|The adsorptive activity on iodine, %, not less||
|Extreme volume of sorption space
on vapors of benzene, cm3/g, not less
TM-4 consists of 4 layers; interlacing: Busofit-T-1 and Busofit-T - serge 2х2;
The sorbent is reeled up in roll on paper cartridges with a diameter not less than 60 mm and 700±30 mm long. Length in roll not less than 30 m. Rolls are wrapped in polyethylene film and keep within boxes from corrugated cardboard.
By request the textile structure and width can be changed