Two-shaft betonosmesitel of BP-2G-750

The skip hoist with a ground lock

The batcher of inert DIS (under a skip)

DTs-300 cement batcher

DVT-200 water batcher

The dosing complex

Platform (support) under a betonosmesitel

STs cement silo

Rastarivatel of RB-2 big-races

Screw

Set ZIP (blades, armor, spokes)

Two-shaft betonosmesitel of BP-2G-750

ABAC Pole Position L20P compressor (Italy)

Lock bilateral "Camozzi" (Italy)

Set for connection of the pneumoequipment

Armor replaceable scaly type. Material: wearproof cast iron of 12 mm

The spokes strengthened (steel molding) fastening like "fist"

Blades are replaceable. Material: ChH16N2T cast iron (the chromic high-alloyed wearproof)

The device of uniform distribution of water with a connecting diameter of 2"

Control panel

Passports of purchased products

The passport on a betonosmesitel

The two-shaft betonosmesitel consists of the motionless case in which two horizontal shaft with the spokes and scraper blades fixed on them are placed. Spokes since 2015 are issued strengthened, from molding steel, fastening to a shaft like "-a fist"-.

Blades from high-strength wearproof cast iron, the term of operation are 2 years. Since 2015 spokes are issued a special design from molding steel, fastening to a shaft like "-a fist"-.

Shaft are connected among themselves by the synchronizer for protection of the drive. Loading of components of concrete mix is carried out directly in the case of a betonosmesitel, for protection against hit of foreign objects the protective lattice is provided.

The drive is carried out from the electric motor of 18,5 kW through the belt drive equipped with a casing, and two modernized strengthened a reducer. Speed of rotation of mixing shaft of 36 turns minute.

The case of a two-shaft betonosmesitel is revetted iznutribrony scaly type. Armor material — - wearproof cast iron of 12 mm. The armor is replaceable, fastens on screws. The armor of scaly type consisting of elements allows to change only the worn-out part of armor that facilitates repair and service.

Unloading of ready concrete mix from a two-shaft betonosmesitel is made through a window in the case bottom closed by a sector lock with a double pneumatic actuator.

Features of installation

• Productivity is 30 CBM hour
• Two mixing shaft, 14 blades
• Replaceable wearproof armor from cast iron of 12 mm
• Double pneumolock "-Camozzi" - (Italy)
• The compressor "-Abac" - (Italy)
• Schneider Electric electroautomatic equipment (Germany)

Characteristics of installation

• Volume on loading, litrov750
• The volume of a ready batch on concrete, l500
• The volume of a ready batch on solution, l600
• Productivity, cubic metrov20... 30
• Quantity of cycles for an hour, when using in automatic liniyakh60
• Mix hashing time, sekund10... 60
• Fineness of filler no more, mm70
• Frequency of rotation of shaft, about мин32
• Supply voltage, Vgts38050
• General rated capacity, kvt20
• The lock is sector, a pneumatic actuator
• Weight no more, kg3200
• Height, mm1130
• Width, mm2040
• Length, mm1575