Seller
Kazakhstan, Almaty
(View map)
(View map)
+7(7
Display phones
13
13 years on Allbiz
Technical characteristics
- Country of manufactureChina
Description
Turning screw cutter of the ZH O660 series of mm GH-2660ZH DRO
[Max. O 660 mm, RMTs of 1525 mm, Power is 12,0 kW]
[Max. O 660 mm, RMTs of 1525 mm, Power is 12,0 kW]
- The exclusive acceptance report of JET with the certified admissions (DIN 8606)
- Massive bed of the machine from gray cast iron
- The tempered and ground directing beds
- The forward grandma with the electromechanical coupling
- The mechanism of smooth start-up protects the engine and increases drive service life
- The spindle drive mechanism constantly works in an oil bathtub
- Removable bridge of a bed, gap
- The transmission allows to cut a carving without replacement of gear wheels
- Convenient management of longitudinal and cross giving by means of the krestovy joystick with the button of the accelerated movement
- Jog operating mode of a spindle
- The tempered and ground gear wheels in the forward grandma and in a transmission
- Adjustment of gaps of guides by means of maple levels
- The centralized system of supply of greasing of a longitudinal support
- The back grandma regulated in the cross direction for turning of cones
- The five-position operating shaft with cams
Technical characteristics: | |||||||||
Model | GH-2660ZH DRO | ||||||||
Diameter of turning over a bed | 660 mm | ||||||||
Max. diameter of rotation, gap (removable bridge) | 870 mm | ||||||||
Diameter of turning over a cross support | 420 mm | ||||||||
Length of the removable bridge | 240 mm | ||||||||
Distance between centers | 1525 mm | ||||||||
Frequency of rotation of a spindle, 12 | 36 - 1600 rpm | ||||||||
Spindle cone | Ø-113 of mm 1:20 | ||||||||
Accession of a spindle, Camlock | D1-8 (DIN 55029) | ||||||||
Opening of a spindle through passage | 105 mm | ||||||||
Longitudinal giving | 0,063 - 2,25 mm / about | ||||||||
Cross giving | 0,027 - 1,07 mm / about | ||||||||
Metric carving, 22 | 1 - 14 mm | ||||||||
Inch carving, 25 | 28'' - 2'' TPI | ||||||||
Modular carving, 18 | 0,5 - 7 MP | ||||||||
Pitchevy carving, 24 | 56 - 4 DP | ||||||||
Max. size of a cutter | 25 x 25 mm | ||||||||
Course of a cross support | 310 mm | ||||||||
Course of the top support | 145 mm | ||||||||
The accelerated movement of a longitudinal support | 4,5 m/min | ||||||||
The accelerated movement of a cross support | 2,0 m/min | ||||||||
Pintle of the back grandma | MK-5 | ||||||||
Course pintles of the back grandma | 150 mm | ||||||||
Working diameter of a motionless lunette 1 | 20 - 125 mm | ||||||||
Working diameter of a motionless lunette 2 | 100 - 240 mm | ||||||||
Working diameter of a mobile lunette | 20 - 100 mm | ||||||||
Width of guides of a cross support | 135 mm | ||||||||
Distance between guides | 405 mm | ||||||||
Output power | 7,5 kW / S1 100% | ||||||||
Power consumption | 12,0 kW / S6 40% | ||||||||
Overall dimensions (DKHSHKHV) | 3000 x 1280 x 1450 mm | ||||||||
Weight | 3565 kg |
-
Technical characteristics: | |||||||||
Model | GH-2660ZH DRO | ||||||||
Diameter of turning over a bed | 660 mm | ||||||||
Max. diameter of rotation, gap (removable bridge) | 870 mm | ||||||||
Diameter of turning over a cross support | 420 mm | ||||||||
Length of the removable bridge | 240 mm | ||||||||
Distance between centers | 1525 mm | ||||||||
Frequency of rotation of a spindle, 12 | 36 - 1600 rpm | ||||||||
Spindle cone | Ø-113 of mm 1:20 | ||||||||
Accession of a spindle, Camlock | D1-8 (DIN 55029) | ||||||||
Opening of a spindle through passage | 105 mm | ||||||||
Longitudinal giving | 0,063 - 2,25 mm / about | ||||||||
Cross giving | 0,027 - 1,07 mm / about | ||||||||
Metric carving, 22 | 1 - 14 mm | ||||||||
Inch carving, 25 | 28'' - 2'' TPI | ||||||||
Modular carving, 18 | 0,5 - 7 MP | ||||||||
Pitchevy carving, 24 | 56 - 4 DP | ||||||||
Max. size of a cutter | 25 x 25 mm | ||||||||
Course of a cross support | 310 mm | ||||||||
Course of the top support | 145 mm | ||||||||
The accelerated movement of a longitudinal support | 4,5 m/min | ||||||||
The accelerated movement of a cross support | 2,0 m/min | ||||||||
Pintle of the back grandma | MK-5 | ||||||||
Course pintles of the back grandma | 150 mm | ||||||||
Working diameter of a motionless lunette 1 | 20 - 125 mm | ||||||||
Working diameter of a motionless lunette 2 | 100 - 240 mm | ||||||||
Working diameter of a mobile lunette | 20 - 100 mm | ||||||||
Width of guides of a cross support | 135 mm | ||||||||
Distance between guides | 405 mm | ||||||||
Output power | 7,5 kW / S1 100% | ||||||||
Power consumption | 12,0 kW / S6 40% | ||||||||
Overall dimensions (DKHSHKHV) | 3000 x 1280 x 1450 mm | ||||||||
Weight | 3565 kg |
Standard complete set:
- 3rd the cam boss of Ø-325 of mm with the direct/return cams
- 4th cam Ø-400 faceplate of mm
- Mm Ø-630 faceplate, mm Ø-250 faceplate
- 4th a position reztsederzhatel with a clamp
- The rotating persistent center MK-5
- Persistent center MK-5
- Transitional Ø-113/MK-5 plug
- Mobile and motionless lunettes
- The pallet for collecting shaving
- Back protective wall
- The filter of the boss with the trailer switch
- Foot brake of a spindle with the trailer switch
- UTsI on 3 axes, the price of division is 0,005 mm an error ±-1 sign
- System of a supply SOZH
- Halogen lamp of local lighting
- Shaft of management with adjustable cams (shutdown of longitudinal giving)
- Trailer emphasis of longitudinal movement
- Adjustable support of a bed
-
Similar company products
Contact the seller
Turning screw cutter of the ZH O660 series of mm GH-2660ZH DRO