- BrandRema Tip Top
Two-component TIP TOP SC 2000 glue for joining and repair of conveyer belts, gumming of metal surfaces
Characteristics: REMA TIP TOP glue - a guarantee of reliable and strong connections and ease of application. Two-component glue is used together with 4% a hardener and possesses excellent adhesive properties. Carefully balanced basis and the high quality standards provide duration of periods of storage of glue structures.
5252029 Cement SC 2000 black 1 kg
5251043 Hardener of UT-R 20 40 of
Scope: two-component glue for connections rubber-rubber, rubber-fabric, rubber-metal, fabric-fabric.
Results of tests of durability of pasting of TIP TOP SC2000
Metal - rubber of 6,5 kg/cm
Rubber - rubber of 6,3 kg/cm
Fabric - fabric of 6,0 kg/cm
Instruction for use of SC 2000 Cement REMA TIP TOP glue
Material preparation: ambient temperature and material from +10 °C to +45 °C; to avoid a direct sunlight and temperature below a dew point (formation of condensation moisture); surface: dry, without himikaliyev, fat and oil;
metal: it is (preferable) to clear of a rust by jet processing (DIN 55928, SA 2,5) or grinding; then to otsherokhovat - the recommended depth of a sherokhovka of min. 30 microns for removal of fat from the cleared surface use a cleaner the TOP TYPE. To put one layer the TOP METAL PRIMER of Metal Primer PR 200, Metal Primer PR 300 or Metal Primer PR 400 TYPE. To allow to dry completely.
rubber: to otsherokhovat thoroughly (so that there is no smooth site left), to remove dust in the dry way.
fabric: to evenly otsherokhovat the rubber remains, to carefully otsherokhovat fabric (so that not to damage), to remove dust in the dry way.
Mix preparation: Carefully to mix the required amount of SC 2000 glue with UT-R 20 hardener (a weight share of 4%) before receiving homogeneous mix. To use mix within 2 hours (viability of glue)
Putting glue: To cover surfaces evenly with two thin layers everyone. The first layer has to dry completely (the minimum time of drying of 30 min., on metal 1 hour). To dry the second layer so long until it reaches degree of weak stickiness (check by the finger back). In case of drying to put an additional layer
Pay attention: At application with a connecting layer CN, need to put the first layer disappears.
Gluing together: The planes intended for gluing together to impose one on another so that bubbles could not be formed, and then strongly prikatat or press.