The unit for entering of ammoniac water into the soil

The trailer two-axis with the tank for transportation of ammoniac water, and also for an agregatirovaniye with a podpityvatel for introduction of ammoniac water directly to the soil (cultivator). Width of the used cultivators from 10 m and more (under a tractor of 260-535 h.p.).

In a design of the trailer the balansirny suspension bracket allowing to carry out smooth movement on a cross-country terrain, the strengthened frame which is not allowing its gap at reloadings, import half shafts and wheels assembled of Starco firm etc. is applied). On the trailer the brake system, a parking brake, an electrical wiring, dimensions is installed. On the trailer there is a platform for fastening of the pump equipment, under introduction of ammoniac water on a cultivator. Material for production of capacities: metal, plastic.

The polypropylene tank represents plastic two-layer single-section capacity, with wall thickness the 7-10th. In the tank there are p-shaped stiffening ribs which create smooth damping of walls of the tank at the movement and protect them otrezky loadings at possible hydroblows of ammoniac water, when rocking the trailer. Small weight, two plastic capacities installed on the trailer, of 5 CBM, everyone, does not create the big pressure upon soil that reduces an expense of a combustible traction tractor.

Capacities are also equipped with hatches on which the respiratory valve which supports the set pressure in section and a mouth, for filling of ammoniac water is installed.

The volume of capacities can be smaller, at the request of the consumer.

Carts are understaffed with technological ladders, depreciation rubber Mbs.Pritsep two-axis with the tank for ammoniac water under cultivators with the capture tire from 10 m and more under a tractor (260-535 h.p.). On demand the brake system, the parking brake, an electrical wiring, dimensions is installed. It is established wide rubber. On the trailer the platform for fastening of the equipment under introduction of ammoniac water is established, the tank is tied with shutoff valves for supply of ammoniac water on a cultivator. Material of production of capacities: metal, plastic. The metal tank represents the single-section capacity made of the state standard specification 2651/GOST 380 low-carbonaceous steel 4 mm thick, the volume of 8 m3, 10 m3, with the viewing hatch with a cover on which the respiratory valve which supports the set pressure in section and a mouth for a product is installed.

The polypropylene tank represents plastic two-layer edinosektsionny capacity, thickness of a wall of 7-10 mm. The small weight of plastic capacities does not give additional load of soil, and it reduces fuel consumption by a tractor. In the top part the mouth for filling of a product with a cover on which the respiratory valve is installed is located. The volume of capacities can be a miscellaneous, at the request of the client.