The replaceable strengthened handles for a sampler of Ø of 50 mm and Ø of 35 mm

Manual selection of test of grain from an embankment, the car, body by means of a spear-shaped sampler

Manual sampling by means of spear-shaped samplers is the easiest and cheap way. Owing to the fact that grain rather dense, it is necessary to apply not small force to enter a sampler on sufficient depth. Here the human factor is swept especially up. Maloperation with a sampler leads to its breakage therefore unsuitable samplers are stored, and the enterprises buy new samplers in tens as an expendable material. Acquisition strengthened  plastic  or  metal   наконечников for samplers with a diameter of 35 or 50 mm can become an exit. Also will facilitate work and replaceable metal handles will help to avoid breakage of a sampler. 

At introduction of a sampler in grain, often happens that a half of a sampler already in grain, but is farther it not in what does not move ahead. A mistake will to begin loosen a sampler - it will lead to its breakage. It is necessary to scroll a sampler (special  plastic tips  promote its introduction in grain weight), or to use the universal replaceable strengthened handles installed in the top part of a sampler and allowing to introduce and withdraw easily it even from very dense grain embankment.

Replaceable metal handles for comfortable introduction of a spear-shaped sampler in grain weight

• The strengthened handles are manufactured of strong aluminum alloy 
• Considerably facilitate grain test selection
• Are strongly fixed on a sampler
• Even if the sampler will break, handles can be removed and put on another
• Is suitable for any samplers of any length of 35 mm and 50 mm

• Handles are installed on a sampler of any length
• On handles notches thanks to which hands do not slide off are made
• The weight of handles for Ø 35 sampler - 0.47kg 
• The weight of handles for Ø 50 sampler - 0.54kg
• The handle size from each party suitable for the successful fellow - 15 cm

Advantages of a metal tip to a spear-shaped sampler:

• The Metallicheky tip is made of strong aluminum alloy
• Durability of a metal tip does not depend on ambient temperature
• The metal tip will serve all service life of your sampler

Advantages  of a plastic  tip to a spear-shaped sampler:

• Tips are made of the Polypropylene of Low Pressure (PLP) maintaining differences of temperatures from-30 to +50 °C. 
• The special design with stiffening ribs allows to enter with ease a sampler even into very dense mass of grain.
• The strong design of a tip provides long service life.
• Plastic tips approach any samplers with a diameter of 35 and 50 mm.