The pump CM 125-80-315/4, sales across Ukraine
- Customer pickup,
- In detail
- Country of manufactureUkraine
- DesignДоставка по Киеву бесплатно. Отправка по Украине службами автоперевозок.
- Type of driveElectric
- Насос СМ 125-80-315/4изготовлены из серого чугуна, защитная втулка и вал - сталь 45, 35.
Design of pumps Cm.
The design of the pump CM is similar to a design of console pumps of K type. Difference consists in a design of the driving wheel and case. In pumps CM the wheel is made with the big section through passage, i.e. with the smaller number of shovels and is significantly wider.
The case and the driving wheel are manufactured of gray cast iron, the protective plug and a shaft - steel 45, 35.
Double omental consolidation from cotton stuffing where for cooling and providing a hydraulic lock technical liquid under pressure exceeding pressure before in a pressure head branch pipe on 0,5-1,0 atm moves is installed in the pump.
The completing electric motors.
Units are completed with asynchronous electric motors, of 220/380 or 380/660B, executions on installation - on paws (1M1081, 1M1001).
Physical and chemical properties of the pumped-over liquid:
hydrogen indicator of pH - from 6 to 8,5, density - to 1050 kg/m3,
the allowed mechanical inclusions:
the abrasive weighed substances - contents on weight - no more than 1,0%, the size of particles - no more than 5 mm, extreme concentration of the pumped-over weight - 2%, the content of gas in liquid no more than 5%.
Temperature of the pumped-over environments - to 80 °C.
Interpretation of a symbol of pumps Cm.
pump SM150-125-315/4-SD-UHL4, where:
CM - waste massny
150 - nominal diameter of an entrance branch pipe
125 - nominal diameter of an output branch pipe
315 - theoretical diameter of the driving wheel
/4 - 1450 rpm, (/2 - 2900 rpm,/6 - 950 rpm)
SD - double omental consolidation
UHL - a climatic modification
4 - category of placement.