The PID-regulator with the timer, 20 steps, three-phase, Рid-1348, 3х3 kW

Work of each step on the principle: Tnemperatura X - Time of X. On reaching the set temperature and its deduction in one point counting of time joins. Upon termination of counting - transition to the following step. Upon termination of the last set step - shutdown of loading and transition to End waiting mode.

The programmable PID-regulator with the timer, 20 steps, three-phase, Рid-1348, 3х3 kW, 3 phases, 9 kW, a temperature regulator, semistorny, Pid-regulation, on a DiN-lath, to +1300 degrees, with the thermocouple of a tkh, the thermal sensor, pid-1348. 

UDS-220.R Pid-1348 temperature regulator to +1300 °C simistorny management on 3 phases of 9 kW, with the timer of 20 steps, smooth temperature increase installation on a DiN-lath, with the THA thermocouple, the thermorelay, the thermostat, measurement and adjustment of temperature. Is suitable for training, a holiday of metal, melting of materials. It is used in jewelry production, at production of ceramics and metal working. 

The case is white. Indicator of a red luminescence. 

The device is intended for automatic deduction of the set temperature on the set intervals of time in a heating zone.

Adjustment method - simistorny, three-phase, by the principle of keeping of the set temperature on the established value.

 Contact element - 3 simistor, loading to 9 kW.

This device can be easy and is reliably installed on a DiN-lath of boards, or panels and to be used in any productions.

The device is intended for work with thermocouples

TXA(K) and TXK (L) type

The device is completed with the TP2/950 thermocouple (TXA(K) to +600 C) http://fotki.yandex.ru/users/uds12r/view/472230/ 

The complete set high-temperature thermocouples is possible: 

to +1000 degrees of TP33 http://fotki.yandex.ru/users/uds12r/view/705557/ 

to +1100 degrees of TP4 http://fotki.yandex.ru/users/uds12r/view/705486/

TP6 http://fotki.yandex.ru/users/uds12r/view/659970/

TP10 http://fotki.yandex.ru/users/uds12r/view/633830/ 

to +1300 degrees tp3 http://fotki.yandex.ru/users/uds12r/view/463436

Important:

In that case when it is necessary to install the thermocouple from the device at a great distance, it is necessary to increase length a special thermo-compensation wire of http://fotki.yandex.ru/users/uds12r/view/533854/ 

 Technical characteristics:

Supply voltage: 220V

Consumption current: 200ma

Sensor type: THA (K) (in a set)

Temperature range: +5 ___ +1300 °C. 

Temperature task step: 1 degree Celsius. Time setting step 1 minute. Quantity of steps - 20. 

Measurement time: 1 second. 

Period of management: 1 second. 

Measurement error: 1%. 

Control unit loading: 3 simistor of 9000 W.

Maintenance instruction:

The device begins work immediately after giving of food 220V.

Before inclusion make all necessary connections according to the scheme.

Attention! Observe polarity of connection of the thermocouple.

 Do not allow hit on conclusions of the thermocouple of any tension,

contacts of conclusions to the case of the ungrounded equipment. Do not connect to tension food plugs higher than 230V.

 Otherwise the device will fail! In these cases repair is made at the expense of the buyer.

Installation of necessary temperature is made by pressing of the Input button. For bystry scrolling hold the necessary button, and on reaching necessary value release. Established

 temperature will automatically remain in memory of the device in 3 seconds, or right after pressing of the Input button.

 It is possible to make changes of data at any moment of work of a temperature regulator.

At emergence on the indicator of the inscription "Obr" it is necessary to switch-off the device and to check reliability of connection of wires of the thermocouple.

Guarantee certificates:

The manufacturer guarantees free repair or replacement of the faulty device within one month from the date of sale.

  The guarantee does not extend to devices with external damages of the case, traces of opening of the back panel, and the signs of connection of load of contacts of a simistor exceeding the most admissible current.

Attention!

  At wrong giving on conclusions of the thermocouple of any tension, producer defines the device exit reason out of operation. In this case guarantee certificates are cancelled, and repair of the device is paid by the consumer.

Warranty repair is made during 8 workers

days after the personal address of the buyer

to the distributor of this device.

Price:

Red indicator of 1580 UAH PRICE: $52

Green indicator of 1599 UAH PRICE: $54 

photo of http://fotki.yandex.ru/users/uds12r/view/609602/

The manufacturer guarantees free repair or replacement of the faulty device within one month from the date of sale.

E-mail: uds12r@ukr.net 

Website: www.uds12r.a5.ru

tel: +38 0679400083

Delivery in any point of Ukraine cash on delivery or Novaposht's advance payment.