Seller
Kazakhstan, Almaty
(View map)
(View map)
+7(7
Display phones
14
14 years on Allbiz
Quickly responds
Technical characteristics
- BrandKazstanex
- Country of manufactureTurkey
Description
The hammer is forging, pneumatic SPH series
[The welded steel case High precision of a punched hole thanks to system of positioning]
[The welded steel case High precision of a punched hole thanks to system of positioning]
• - The welded steel case • - High precision of a punched hole thanks to system of positioning • - All matrixes and punches, tool shop on 8 - units • - The mobile tool shop adapted for a working corner of the operator • - Simple and functional system smazk and • - The foot pedal regulated depending on the working horizon and a protective cover • - The steel or wooden basis (at choice) • - Compliance of CE to norms
| TEKHNICHESKIYEKHARAKTERISTIKI | SPH 40 - | SPH 50 - | SPH 60 - | SPH 75 - | SPH 100 - |
| Operating system | pneumatic | pneumatic | pneumatic | pneumatic | pneumatic |
| Nominal force of a punched hole | 40 - | 50 - | 60 - | 75 - | 100 - |
| Number of waves in a minute | 240 - | 240 - | 220 - | 210 - | 210 - |
| Maximum speed of a punched hole | 180 - | 185 - | 220 - | 220 - | 330 - |
| Power | 4 - | 4 - | 7,5 - | 7,5 - | 7,5 - |
| Revolutions per minute | 1450 - | 1450 - | 1450 - | 1450 - | 1450 - |
| Tool section | 150 - 78 - - mm | 150 - 78 - - mm | 150 - 78 - - mm | 150 - 78 - - mm | 160 - 90 - - mm |
| Approximate weight | 1200 - | 1300 - | 1550 - | 1950 - | 3250 - |
| Mass of an anvil | 295 - | 300 - | 355 - | 430 - | 900 - |
| Width (A) | 645 - | 706 - | 741 - | 780 - | 820 - |
| Length (B) | 1500 - | 1585 - | 1700 - | 1850 - | 2230 - |
| Height ©- | 1350 - | 1405 - | 1640 - | 1680 - | 1760 - |
-
| TEKHNICHESKIYEKHARAKTERISTIKI | SPH 40 - | SPH 50 - | SPH 60 - | SPH 75 - | SPH 100 - |
| Operating system | pneumatic | pneumatic | pneumatic | pneumatic | pneumatic |
| Nominal force of a punched hole | 40 - | 50 - | 60 - | 75 - | 100 - |
| Number of waves in a minute | 240 - | 240 - | 220 - | 210 - | 210 - |
| Maximum speed of a punched hole | 180 - | 185 - | 220 - | 220 - | 330 - |
| Power | 4 - | 4 - | 7,5 - | 7,5 - | 7,5 - |
| Revolutions per minute | 1450 - | 1450 - | 1450 - | 1450 - | 1450 - |
| Tool section | 150 - 78 - - mm | 150 - 78 - - mm | 150 - 78 - - mm | 150 - 78 - - mm | 160 - 90 - - mm |
| Approximate weight | 1200 - | 1300 - | 1550 - | 1950 - | 3250 - |
| Mass of an anvil | 295 - | 300 - | 355 - | 430 - | 900 - |
| Width (A) | 645 - | 706 - | 741 - | 780 - | 820 - |
| Length (B) | 1500 - | 1585 - | 1700 - | 1850 - | 2230 - |
| Height ©- | 1350 - | 1405 - | 1640 - | 1680 - | 1760 - |
-
Similar company products
Contact the seller
The hammer is forging, pneumatic SPH series
