Currency EUR
The device for cutting of a profile on Rubber Cut RC 400 R rubber – Konvejer Servis, OOO | all.biz
Buy The device for cutting of a profile on Rubber Cut RC 400 R rubber
The device for cutting of a profile on Rubber Cut RC 400 R rubber
bc8739afa0

The device for cutting of a profile on Rubber Cut RC 400 R rubber

In stock
Price:
450 EUR
Shipping:
Seller
Ukraine, Kiev
(View map)
+380 
Display phones

Company rating

100% of positive reviews from 3
Description
Thermocutting torch for cutting of the RUBBER CUT RC 400 R profile

For cutting of a profile in rubber 3-20 mm wide and 7-16 mm in depth. The cutting torch is equipped with the transformer with the switched power levels (2х4) on which it is possible to establish knife resistance. Thanks to it on a knife current which is required for heating of a knife of the corresponding size moves. The required power level is specified on each packing with knives. The small weight of a cutting torch and individual heating of knives allow to cut easily rubber without application of special efforts.

5641165 RUBBER CUT RC 400 R Working tension of 220 — 240 Century. The roller head provides more exact and easy management of cutting process.

Rubber Cut RC 400 R 230V

The instruction for use of the tool for cutting of a profile on rubber


Indications on the information plate of the device and in a network have to coincide, only under such circumstances the device can be connected to a network.
Connect Rubber Cut only to the grounded electric socket. Protect the device and connecting a cable from influence of moisture and damages.
Insert a suitable edge into a clip. For big knives, turn a clip a six-sided key. Always switch off the device before replacing, or to correct an edge!
You contain knives, a clip and the cutting head in purity. From time to time clear them solvent for ensuring good conductivity of current.
Regulate intensity of cutting by means of the switch. Position 1-Min.: minimum intensity of heating, small edges. Position 4-Max: maximum intensity of heating, big edges. By means of the MIN/MAX switch on each position heating temperature with a double step Transfer of pressure on rubber switches to the cutting head turns on the device therefore current passes on an edge and heats it.
In case of an overload, the regulator of heating switches-off the device, and as soon as it cools down, again includes.
The fast movement of an edge interferes with rubber ignition.
During the work do not put a hand ahead of the cutting head! There is a probability of a trauma when sliding an edge.
Contact the seller
The device for cutting of a profile on Rubber Cut RC 400 R rubber
The device for cutting of a profile on Rubber Cut RC 400 R rubber
for
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
Shipping method
Compare0
ClearSelected items: 0