Currency EUR
The combined road car. Model: KO-829B1 – KOMMASh, AO |
Buy The combined road car. Model: KO-829B1
The combined road car. Model: KO-829B1

The combined road car. Model: KO-829B1

Products from producer
In stock
1.53 EUR
  • 1.4 EUR/pcs  - from 2 pcs
  • Cash,
  • Invoice payment,
  • Visa/Mastercard,
  • Cash on delivery
  • In detail
Russia, Arzamas
(View map)
Display phones

Company rating

87% of positive reviews from 38
Technical characteristics
  • BrandКОММАШ (Арзамас)
  • Country of manufactureRussia

The combined road KO-829B1 car is intended for year-round service of city and main roads with an asphalt and concrete covering at an air temperature from minus 20 s to plus 40 s.

  • During the summer period the car is used for a sink, watering, cleaning of dirt and dust of pavings, and also for a sink of sidewalks and watering of green plantings and lawns.
  • During the winter period the car is used for high-speed and patrol cleaning of a roadbed of the new-fallen or pressed snow, removal of frost and topping by deicing materials.

Technical characteristics:  

Basic chassis KAMAZ-65115
Fuel type diesel
Full weight, kg 22400
Overall dimensions (DKHSHKHV), mm 11900*х4225*х3600 *
* the maximum indicators are specified
Capacity, m3
- NNM tanks 12
- plastic tanks 10
- tanks of system of moistening 1,56
- PGM distributor bodies 8
Width of a working zone, m
- PGM distributor 2-10
- low pressure sink 2,5 - 20
- high-pressure sink horizon. 2,8 - 3,5, vert. 0,8
- laths for distribution of ZhPGM 3-12
Density of distribution of PGM, g/m2
- peskosol 50 - 500
- pure salt with moistening 5-50
- liquid reagents 5-80
Compatibility with additional options
- the dump is forward rotary +
- the dump is forward rotary hydraulic +
- dump high-speed +
- dump side +
- the dump is grader +
- the brush is frontal +
- the brush is interbasic +
- the brush is back -
- a brush for a sink of barrier protections +
- the gun is raspylitelny +

Additional information:

  • The body of the European section, the increased rigidity, geometry of a body excludes lag of PSS on body walls.
  • Design of the scattering device easily folding, allowing to make replacement of any element with use only of a hand tool.
  • Arrangement of a spare wheel behind a cabin.
  • Maslobak with a compartment under hydroelements is transferred for a chassis cabin, the cover of the hydroblock is made of aluminum.
  • On all length of a body brushes for cleaning of chains and scrapers and the protective pallets preventing PSS prosypaniye on chassis units are established.
  • Possibility of installation of one of three types of chains with the increased explosive effort: anchor calibrated, vtulochno-roller, lamellar.
  • Two options of a brush interbasic on execution of the drive: one SY-250 hydraulic motor, two MGP-125 hydraulic motors. Control of turns of a brush is carried out by means of PP12-01 expense regulator.
  • The cone-shaped form of a disk of a spreader and Z-shaped guides of a shovel provide uniform distribution of PSS on width. Hydraulic motor of the drive of a disk of import production (Bulgaria).
  • The conveyor drive – a reducer with the hydraulic motor of import production.
  • Management of operation of the hinged equipment from the driver's cabin.
  • Ladder for visual survey.
  • Regulation of the scattering disk on height.
  • The lattice for trim of the PSS large fractions is executed from metal. strips it is also equipped with the technological hatch for access to mechanisms.
  • The notification of the driver about emergency leak of hydroliquid from system by means of the visual alarm system in the driver's cabin.
  • The drain highway of the increased section excluding temperature increase of hydroliquid to critical values.
  • System of regulation of width and asymmetry of distribution of PSS.
  • The bearing knot of a tension shaft is taken out from zone PSS.
  • Additional flashing beacon in a zone of the scattering device.
  • Material of a mobile tray and the mine of supply of sand – stainless steel.

Terms of delivery:

  • Minimum scope of supply: (from 1 piece)
  • Terms of delivery: (FCA, CPT, CIP)

Terms of payment:

  • bank transfer,
  • advance payment of 100%,
  • advance payment for statement in the plan of production of 50%. The rest of 50% before shipment.

The company makes:

  • Garbage trucks with back loading,
  • Garbage trucks with side loading,
  • Container garbage truck,
  • The combined road cars,
  • Vacuum cars,
  • Ilososny cars,
  • Cars for washing of channels,
  • The combined cars.
Shipping method
Payment method
Contact the seller
The combined road car. Model: KO-829B1
The combined road car. Model: KO-829B1
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
ClearSelected items: 0