- Country of manufactureUkraine
- Wattage42 kW
The automatic molding machine one-position for molding under pressure of fashions. D3136-1000 for production of products from thermoplastic materials with a temperature of plastication up to 350 °C - polyolefins, polystyrene and its copolymers, polyamides, thermoplastic polyurethane, polyacrylic esters.
At equipment of the car special equipment it is possible to produce products from polycarbonates, copolymers of formaldehyde, unplasticized polyvinylchloride, polifeniloksid.
Are provided the mode of molding pressing for production of thin-walled products of a difficult configuration and the intrusion mode at production of products with wall thickness more than 3 mm with increase in volume of injection to 30.
Operating mode of the machine: adjustment, manual, semi-automatic, automatic.
FEATURES OF THE DESIGN
The knot of locking differs in an original design and reliable fixing of a compression mold at injection. Thanks to high speeds of opening and short circuit of a compression mold at small time of switching of electric and hydraulic elements the short running cycle is provided. The automatic pulse system of liquid greasing continuously greases couples of friction of lever knot of locking.
Readjustment of mezhshtampovy distance is mechanized. The pusher is hydraulic.
Molding knot rotary that provides fast cleaning or change of cylinders of plastication with the choice with various diameters for the maximum pressure of molding or volume of casting. Regulation of frequency of rotation of the screw stepless, within 40-315 1/min. The cylinder has four zones of heating.
By car sensors of movement of a plate of knot of locking, the course of the plasticizing worm, injection volume are installed.
Drive. Supply of working liquid in a hydraulic system is carried out by two-line lamellar pumps. Working liquid moves three independent streams that it gives the chance to receive 14 combinations of expenses. Streams of working liquid four compact hydroblocks with the built-in valvate and butt hydroequipment operate. The hydroequipment allows to set remotely 63 sizes at injection and plastication of material.
Diameter of the screw - 90 mm
Molding pressure - 140 MPas
Working volume - 1250 cubic cm
Molding speed - 350 (cubic cm) / with
Plasticating ability on polystyrene, not less - 238 kg/h
Power of heating of the cylinder of plastication - 12.32 kW
Effort of locking - 4000 kN
Plate course length - 630 mm
Height of the installed tool - 320-630 mm
The pusher course - 160 mm
Distance between columns in light, horizontal - 630 mm
Distance between columns in light, vertical - 630 mm
Working pressure - 10.5 MPas
Electric motor power - 37 kW
The mass of the car - 19000 kg
length - 7900 mm
width - 1650 mm