Technical characteristics
- BrandИТОМАК
- Country of manufactureRussia
Description
The mixer is intended for the preparation of pulp (sandy ore material or a mixture with water in a certain ratio) or disintegration of clay materials, is then sent for further processing. It is used in laboratories concentrating factories in combination with other devices (concentrators, separators, etc. ).
SPECIFICATIONS
parameter name |
Value |
---|---|
The maximum amount of slurry L | 80 |
activator speed, rev / min | |
With converter | 10 - 350 |
The diameter of the outlet valve, DN, mm | 50 |
The gap between the tank and the bottom of the activator, mm | 13 |
Installed power, kW, not more | 1. 1 |
Weight with a control cabinet, kg, not more than | 110 |
Overall dimensions, mm, not more: | |
Length | 900 |
Width | 820 |
Height | 890 |
DEVICE
The mixer consists of a tank (1). Above the tank on the platform (2) strengthened bearing assembly (3) (see. Figure 3). The shaft (4) rotates in bearings (5). Impeller mounted on the shaft (6). To prevent water entering the bearings and mineral particles in a bearing assembly mounted rubber cuff (7). Bottom tank cap is screwed on the socket (14) designed to zamyvki stirrer from material residues after use.
Contact the seller
The agitator impeller 80 E