TGI1-500/20 thyratrons

TGI1-500/20

Pulse modulator TGI1-500/20 thyratron is intended for switching in the scheme of the linear modulator.

Is issued in glass registration.

The socle is special, 4-shtyrkovy.

The cylinder is filled with hydrogen.

The cathode is oxidic, indirect heat.

Time of a warming up of 5 min.

Work in vertical position, by the anode is recommended up.

Ambient temperature is from-60 to + 90C.

Cooling:

- anode radiator air compulsory

- grid radiator natural.

Service life - not less than 500 h.

Weight - no more than 3 kg.

Nominal electric data of TGI1-500/20:

Heat tension, In...... 6,3

Heat current, And...... 13-17

Current in an anode chain in an impulse, And...... 500

Average value of current in an anode chain, And...... 0,5

Average output power, kW...... 10

Duration of an impulse, microsec...... no more than 10

Maximum permissible electrical quantities:

The largest tension of heat, In...... 6,6

The smallest tension of heat, In...... 6,0

The largest amplitude of the return tension on the anode at a loading resistance mismatch with a wave resistance of the line, kV...... 20

The largest amplitude of direct tension on the anode, kV...... 16

The smallest amplitude of direct tension on the anode, kV...... 3

The greatest current in an anode chain in an impulse, And...... 500

The greatest steepness of the front of current of the anode in an impulse, And / microsecond...... 2500

Service conditions:

1. The lamp panel and fastening of thyratron to the scheme have to provide free access of air to the lower surface of a socle and to a grid radiator.

2. It is forbidden to direct an air stream to glass near an anode conclusion.

3. The loading resistance mismatch with a wave resistance of the line is necessary for creation on the anode of thyratron of negative tension after passing of an impulse of current.