- BrandЭлектроника и связь
- Country of manufactureRussia
TGI1-10/1
Pulse modulator TGI1-10/1 thyratron is intended for work as the switchboard in schemes of the linear modulator. Is issued in glass registration.
Socle 6-shtyrkovy with a button bottom, special.
The cylinder is filled with hydrogen.
The cathode is oxidic, indirect heat.
Warming up time 60 sec.
Works in any situation.
Ambient temperature is from-60 to +100 °C.
Cooling is natural.
Service life - not less than 300 h.
Weight - no more than 50 g.
Nominal electric data of TGI1-10/1:
Heat tension, In...... 6,3
Heat current, And...... 2,8±0,4
Current in an anode chain in an impulse, And...... 10
Frequency of repetition of impulses...... 20
Periodic instability of ignition, microsecond...... no more than 0,2
Characteristic of ignition positive.
Parameters of the setting fire grid impulse:
- tension amplitude, In...... not less than 150
- current amplitude, ma...... not less than 100
- impulse duration, microsecond...... 1-6
- the steepness of the front of an impulse, In / microsecond......>, 400
Maximum permissible electrical quantities of TGI1-10/1:
The largest short-term tension of heat, In...... 6,8
The smallest short-term tension of heat, In...... 5,8
The largest amplitude of direct tension on the anode, kV...... 2
The largest amplitude of the return tension on the anode, kV...... 1
The greatest current in an anode chain in an impulse, And...... 20
The greatest value of average current in an anode chain, ma...... 50
The largest frequency of repetition of impulses, kHz...... 40
Service conditions
1. For thyratron ignition on its grid the positive rectangular impulse of tension has to be given.
2. For a net chain the following sizes are recommended: resistance in a chain of the cathode of the cathodic repeater no more than 2 lumps, resistance of leakage of a grid 10-20 lump, capacity of the dividing condenser in a chain of a grid 2000-5000 pf.
Under the order, 14 days.
