Currency EUR
Tester hydraulic TG-200 – Korporaciya Gidroeleks |
Buy Tester hydraulic TG-200
Tester hydraulic TG-200

Tester hydraulic TG-200

Products from producer
In stock
1053.4 EUR
  • 1016.44 EUR/pcs  - from 2 pcs
Ukraine, Kharkov
(View map)
Display phones
Technical characteristics
  • BrandГидроэлекс
  • Country of manufactureUkraine
  • Measurement range0 - 320  bar
  • Конструктивное исполнениемоноблочное
  • Состояниеновое
  • Условный проход20.0 (мм)
  • Номинальное давление32.0 (мм)
  • Максимальное рабочее давление35.0 (мм)
  • Максимальный расход рабочей жидкости200 (л/мин)
  • Гарантийный срок12 мес
  • Дополнительные характеристики
  • Минимальная температура рабочей жидкости5.0 (град)
  • Максимальная температура рабочей жидкости90.0 (град)
  • Тип присоединенияРезьбовое
  • Тонкость фильтрации25.0 (мкм)
  • Вес9.0 (кг)
  • Погрешность измерения расхода
  • (% от верхнего предела измерения)4
  • Погрешность измерения давления
  • (% от диапазона)0.5
Tester hydraulic TG-200

it is intended for measurement of the following parameters of a hydraulic system:

  • consumption of working liquid, l/min;
  • pressure of working liquid, MPa (kgf/cm2);
  • temperature of working liquid, Page.

also it can be applied to diagnosing of hydraulic pumps, to debugging of work of a hydraulic system and search of malfunctions of its elements.

The current values of pressure and temperature are displayed by arrow devices, and value of an expense is brought to a board of the indicator of an expense (IRCh-1).


As a part of a hydrotester the load valve which at the same time carries out function of the adjustable safety valve is built in.


The device is mobile and easy-to-work, is powered from the accumulators which are built in IRCh-1.

The hydrotester of TG-200 is used for the solution of a wide range of the tasks arising in use the gidrofitsirovanny equipment, for example:

  • check of technical condition of pumps (pump efficiency) with giving to 200 l/min - measurement of size of giving of the pump depending on the loading pressure which is established by the load valve;
  • tincture of the maximum pressure of a hydraulic system which is limited to the load valve and is regulated depending on the most admissible pressure of the pump. Thus, the device can be connected directly to an exit of the pump, the additional safety valve is not required;
  • expeditious control, and also diagnostics of regulators of an expense and safety valves, etc.
Shipping method
Contact the seller
Tester hydraulic TG-200
Tester hydraulic TG-200
by the goods
Your message must contain at least 20 symbols. The message must not be more than 2000 symbols.
Obligatory field is not filled
The field is wrongly filled
The field is wrongly filled
ClearSelected items: 0