Termoformer automatic Alpha CTA-150M

Appointment - receiving by the pneumoformation method in negative dural forms from film rolled material of blister products, korreks, the box, the squared tray with individual otrezky, on wasteless technology.

Technical characteristics:

Climatic modification on GOST 15150-69:	UHL 4.2
Degree of protection:	IP 3.0
Drive type:	pneumatic
Class of purity of the used compressed air in accordance with GOST 17433:	not worse 8
Power supply:	200B, 1F
Maximum power consumption:	4,0 KW
Average power consumption:	3,0 KW
Pressure of the consumed compressed air:	5 - 10 Bars
Maximum consumption of compressed air:	0,34 m3/min.
Average (nominal) consumption of compressed air:	0,3 m3/min.
Type of cooling liquid:	Tap water, water technical, antifreeze, solutions of glycols (flowing or multiturnover with the water cooler)
Maximum consumption of cooling liquid:	2,5 l/min
Material heating method:	Contact, unilateral
Formation method:	Pneumatic
Method of department of products:	Piece
Types of the made products:	Negative
The maximum sizes of the made products:	250 × 350 mm
The maximum depth of the made products:	55 mm
Types of the used films:	HIPS, SB, OPS, PVC, PET
Thickness of the used films:	0,18 - 0,4 mm
Maximum width of the film:	250 mm
Maximum diameter of the roll of the film:	500 mm
Maximum weight of the roll of the film:	50 kg
Performance:	7,5 - 34 cycles/min.
The guaranteed load factor when changing equipment is not more often than 1 time a week:	0,91
Overall dimensions (длина×ширина×высота):	2427 × 611 × 1572 mm
Weight:	180 kg
Average time of readjustment:	1,5 hours