- Country of manufactureRussia
- Volume10,20 L
- Combustibility of the materialIncombustible
- Укрывистость гр/м2 (ГОСТ 8784-75)176
- Плотность г / см³0,55
- Цвет пленки (базовый)Белый
- Массовая доля не летучих веществНе менее 70%
- РастворительОчищенная вода
- Внешний вид покрытияМатовая, ровная, однородная
- Расчетная теплопроводность Вт/м °С0,0012
- Теплоотдача Вт/м °С3,9
- Термического сопротивления м2*С\Вт (при 1 мм)1,0
- Коэффициент паропроницаемости Мг/м ч ПА0,017
- Адгезия покрытия (ГОСТ 15140-78)1 балл
- Класс горючестиНГ
- Хранение (в плотно закрытой таре)12 месяцев
- Полное высыхание до степени 340 мин.
- Межслойная сушка24 ч.
Completely non - flammable fluid heat insulation due to the included in the composition special flame retardants. Warming of facades, internal and external walls of buildings, balconies, mansards and loggias, cellars and basement floors. «Facade» has a high coefficient of vapor permeability, in contrast to the modification "Standard".
The coating "TERMION FASAD NF" was specially designed for surfaces such as concrete and brick.
Excellent heat - reflective characteristics, high vapor permeability and adhesion allow it to be used in professional building thermal insulation.
To give an attractive appearance, TERMION FASAD NF adds a colleague.
"TERMION FASAD NF" eliminates freezing and condensation, which protects buildings from heat losses. The coating has special biocide additives to prevent the appearance of fungus and mold. Safe for others and is characterized by a lack of toxic odor.
In comparison with other modifications of TERMION, this coating has the highest coefficient of vapor permeability. Because of this, the walls, insulated by TERMION FASAD NF, do not absorb moisture, and unnecessary pairs easily leave the room. Excellent hydrophobic characteristics of TERMION FASAD NF make it one of the most popular solutions in residential and industrial construction.
Increased resistance "TERMION FASAD NF" to temperature fluctuations, ultraviolet and increased humidity, allow us to abandon the protection of facades with facing materials, which is very popular when using "traditional" heaters.
"TERMION FASAD NF" looks like ordinary paint and is also easily applied to any surface. After 5 - 6 hours, after application, the coating dries up and turns into an elastic heat insulator. By its characteristics, TERMION FASAD NF far exceeds its "traditional" competitors.
"TERMION FASAD NF" contains 80% microgranules from glass ceramics "3M" (France) and 20% of the composition is a mixture of microgranules of silicone, acrylic base and rheological additives.
Before coating, it is thoroughly mixed by hand or with a drill (rotation speed up to 200 rpm).
Requirements for the surface on which the thermal insulation is applied: dry and clean (without grease, dirt and dust)
It is not recommended to apply TERMION FASAD NF on painted surfaces.
For application, use a roller, brush or spray (airless).
The ambient temperature, when painting, should be in the range: + 5 ° C - + 40 ° C.