- Country of manufactureRussia
Tables of the SO series are intended for a dochistka and processing of root crops and vegetables. Depending on model the table can be equipped with one or two bathtubs. Also the table has one, or two openings in a table-top under which capacity for collecting waste is located. It allows to equip at the same time two workplaces, to clear two types of root crops, or to place the peeled vegetables in one of bathtubs, thereby, preventing a possible zavetrivaniye of vegetables. Tables are equipped with three boards.
The table-top of tables is made of food stainless steel. It is strengthened from the inside by a leaf of the laminated wood-shaving plate (WSP) that increases durability and excludes a table-top deflection. Lamination of a chipboard provides protection it from moisture and prevents hit of wood dust on food.
The framework of tables consists of the racks executed in the form of a corner and regiments lattices.
Products folding are also delivered in convenient packing that facilitates their transportation and storage. Assembly of tables is made by the buyer.
Legs of tables have the support regulated on height allowing to eliminate roughnesses of a surface.
|"The table-top is made of AISI 304 stainless steel 0,8 mm thick and strengthened by a substrate from laminated by a chipboard 16 mm thick. Table-top thickness – 40 mm. Load of a table-top has to be no more than 100 kg. In wall part of a table-top of a vvaren one bathtub of 1000х250 mm in size or two 620х250 mm and 200 mm in depth with a drain opening of Ø-50 of mm. In forward right part of a table-top it is made one or two technological openings of Ø-220 mm intended for collecting cleanings. Edges of an opening are made of the stainless steel forming the cylinder 100 mm high. The cylinder has dense connection with a table-top. Three boards 50 mm high are direct continuation of a table-top. The framework is folding, gathers by means of M6 bolts. Framework material – galvanized steel 1,2 mm thick. Racks of a framework represent a corner with faltsovanny edges for increase in rigidity of a design and an exception of injury risk. The binding for ensuring rigidity of a framework is presented by three channels from galvanized steel. Basic legs are regulated on height within 20 mm and are made of stainless steel with a plastic substrate from below for prevention of damage of a floor. All tables have standard height of 870 mm."|
|Model||Overall dimensions, mm||Weight, kg|
|Length||Width||Height (with a board)|
|CO-1/1200/800||1200||800||870 (920)||- 30,3|