Starting Rigips Perliti plaster

Starting Rigips Perliti plaster

Preparation and drawing

Gradually lay out 10 kg of perlitovy finishing plaster "Rigips Siva" in the pure container with water in number of 6.5 liters. Wait several minutes, for full contact of water and material. Begin to interfere solution with the manual mixer or a trowel before receiving homogeneous mass. At unceasing hashing by the mixer hashing time no more than 3 minutes. For receiving a plain surface application of a lath of the equalizer is recommended Outline ready solution on a surface a plaster shovel or a trowel. Level on a surface and in 45-60 minutes after drawing grind a surface a steel trowel before luster giving. Procedure time about 50 - 80 minutes. Average value of heat conductivity of perlitovy plaster RIGIPS plaster ς = 0,37w/m. Perlitovy plaster RIGIPS plaster reduces an exit of sounds outside. Average coefficient of sound conductivity of perlitovy plaster RIGIPS plaster ∞ = 0,45. In case the surface of plaster undergoes fire, the structure of plaster emits water that burning of a surface detains.

Recommendations and cautions

Temperature in the room and a surface has to be not less than 5 °C.
Used capacity, the trowel and other tools need to be cleaned before each application.
In order to avoid formation of lumps in plaster, it is not recommended to add to solution water when mixing or after mixing.
The surface of drawing has to be cleared of dust, fats and dirt.
Before putting solution, apply anticorrosive protection on metal surfaces.
At application on ceilings:
Before putting plaster it is necessary to give surfaces a roughness.
At application on walls:
Completely clear the remains of shuttering fat on the surface of coarse-grained concrete.
In order to avoid losses and receiving a plain wall surface it is necessary to use a basic level. The recommended drawing thickness: — On gas-concrete walls of 5-10 mm. — On brick walls of 8-15 mm. — On a coarse-grained concrete surface of 5 mm.
After plaster completion of the procedure, before putting paint, grinding is recommended by sateen finishing plaster.

Storage conditions

Perlitovy finishing RIGIPS plaster needs to be used within 6 months, beginning of the date specified on a bag. Bags with plaster need to be stored in the dry covered room on pallets, height of warehousing should not exceed 20 bags.

Health protection and work

During the work, for safety of your health use a working helmet, glasses and a mask.
In case of hit of dust in eyes, wash out eyes under plentiful water.
In case of casual hit in a mouth, carefully rinse a mouth with water.

Technical characteristics

Transportation