STANDS FOR TESTS OF PIPELINE DN 100 FITTINGS... 1400 MM OF PKTBA-S-5-1050/1300, PKTBA-S-5-1000/600, PKTBA-S-5-900/850

APPOINTMENT:

• tests for durability and density of material of the case details and welded seams which are under pressure of the test environment;
• tests for tightness of a lock;
• tests for tightness of rather external environment on consolidation of mobile and motionless connections;
• tests for working capacity.

 THE TESTED PRODUCTS:

• latches;
• spherical cranes;
• locking valves (gates);
• backpressure valves;
• disk locks;
• pith cranes.

 TYPE OF ACCESSION OF THE TESTED PRODUCT:

• flange;
• under welding.

• ADVANTAGES:

  • The power hydraulics of the clutch works from the oil pump station that increases service life of stands.
  • Check of fittings on tightness of a lock on both sides does not demand reinstallation of the tested fittings that considerably reduces time for carrying out tests.
  • In stands the special system is applied to removal of air from the tested product that increases safety, productivity, reliability of the obtained data and saves from need for additional drain of air. *
  • Stands are equipped with the pallet for collecting water.
  • Application of sleeves of high pressure with quick disconnect connections (BRS) allows to reduce significantly time for preparation for tests.
  • Stands are quickly adjusted under the construction length of fittings due to existence traverses with a hydraulic actuator or the electric drive.
  • Thanks to application of the patented design of the self - condensed caps when carrying out tests axial compression of fittings is minimum that provides reliability of tests, protects fittings from deformation and increases fittings service life. *
  • All elements contacting to water are corrosion - resistant.
  • Stands are completed with replaceable caps for test of fittings under welding. It exempts the operator from need of a privarivaniye (screwing up on hairpins) caps to branch pipes and reduces process of their replacement. *
  • For work simplification process of installation and test is completely mechanized.
  • For reduction of time of filling of fittings with the test environment lines of the increased diameter are used.
  • For convenience of work stands are completed with the remote control of management.

  * Upon the demand of the customer.