Spacure VD-AK-002

Purpose: </ span> </ span> </ strong> Applied indoors with non-normalized humidity for alignment of prepared surfaces of mineral, cement and gypsum-containing bases. </ span> </ font> </ p>

Consumption: </ span> </ strong> Average consumption per layer 0.4 -1.0 kg / m?. </ Span> </ font> </ p>

Preparation of the foundation: </ span> </ strong> Clean the surface from dust, dirt, Old fragile coatings, if necessary, degrease. glossy surfaces to sand up to a matte state. Turn the surface impregnating VD-AK-004. </ span> </ font> </ p>

Application method: </ span> </ strong> work at a temperature not lower than + 5? C and relative humidity of no more than 60%. Before applying a putty, thoroughly mix the drill with a screw nozzle. Do not dilute. To obtain a mastic to thicken the putty with the addition of dry cement (5-15% of the mass) with stirring to the desired consistency. Material is applied thin The layer of manually by the movements of the spatula in different directions to the complete elimination of irregularities. The last movements of the spatula plot is evenly loaded. If necessary, it is possible to apply the second layer. After drying, the covered surface is treated with sandpaper, is dustd and covered with impregnation </ span> </ span> VD-AK-004 universal </ span> . </ span> </ font> </ p>

The time of the interlayer drying should provide a complete drying of the previous layer. </ span> </ font> </ p>

Tools and equipment wash off with water immediately after use. </ span> </ font > </ p>

Precautions: </ span> </ strong> Fire-free material and non-toxic. Not It is recommended to mix with other types of paint materials and solvents. When working, use personal protective equipment. </ span> </ font> </ p>

When you get into the skin, and rinse with plenty of water! </ span> </ font> < / strong> </ p>