Sp Single Stage Pump Vertical Submerged Slurry Pump
- Courier
- In detail
. Application and Features
Type SP/SPR pumps are vertical, centrifugal slurry pumps that are submerged in sump to work. They are
designed for delivering abrasive, large particle and high density slurries. These pumps do not need any shaft seal and sealing water. They can also be operated normally for insufficient suction duties.
Wet parts of type SP pumps are made of abrasion - resistant metal.
All parts of type SPR pump immersed in liquid are lined with rubber. They are suited to transport the slurry which contains non - edge and abrasive particles.
The type with "L" is a series of sump pump with an extended shaft, which is suited for the working condition of the deeper lever. The guide bearing construction is added to the pump on the basis of the standard pump, so the pump is with both more steady operation and wider application range, but flushing water should be attached to the guide bearing.
Performance Table
Model |
Max. Power (kW) |
Material | Flow(L/S) | Head(m) | Speed(r/min) | Max. efficiency | No. of Vanes |
Impeller Diameter (mm) |
Weight(kg) |
SP | |||||||||
40PV | 15 | Cr27 | 5 - 12 | 4 - 28 | 1000 - 2200 | 40 | 5 | 188 | 285 |
65QV | 30 | 6 - 24 | 5 - 31 | 700 - 1500 | 58 | 5 | 280 | 430 | |
100RV | 75 | 15 - 80 | 5 - 35 | 500 - 1200 | 56 | 5 | 370 | 860 | |
150SV | 110 | 30 - 130 | 8 - 40 | 500 - 1000 | 52 | 5 | 450 | 1700 | |
SRP | |||||||||
40PV | 15 | Rubber | 5 - 11 | 4 - 26 | 1000 - 2200 | 40 | 5 | 188 | 280 |
65QV | 30 | 6 - 29 | 5 - 30 | 700 - 1500 | 51 | 5 | 280 | 420 | |
100RV | 75 | 18 - 80 | 5 - 35 | 600 - 1200 | 62 | 5 | 370 | 840 | |
150SV | 110 | 30 - 130 | 8 - 40 | 500 - 1000 | 52 | 5 | 450 | 1700 |
Features
- Flow passage components: this type of pump use wear - resistant metal, the impeller choose to wear - resistant metal or rubber.
- Bearing components: we use grease lubrication. According to the slag slurry pool, liquid height can choose different lengths of pump shaft or suction pipe.
- Sealing: Doesn't need any shaft seal or shaft seal water. In suction volume, an insufficient conditions also can work normally below.