- Country of manufactureRussia
Solid fuel water - heating boilers of the Ey series based on gas - generating furnaces are intended for use in heating, hot water supply, as well as for technological needs.
The boiler consists of a firebox and a water tube heat exchanger.
gas generator, non - mechanized, equipped with an operational fuel bunker with a single load for one hour of continuous operation.
made of 3 concentric coils and a top cooled cover. The two - pass gas - flow heat exchanger scheme provides minimal ash deposition on the heat exchange surfaces.
The boiler furnace allows burning the following types of fuel: sawdust, shavings, wood chips, sunflower husks, waste chipboard, fiberboard, MDF, etc. The fuel can also contain woodworking trimmings (up to 0.5 m in length) up to 30% by volume. The nominal thermal power is achieved at a fuel moisture content of no more than 30% .
The main requirements for fuel are ash content not exceeding 5% , moisture content not exceeding 55% (122% ).
The moisture W was calculated according to the formulas W = (mt - mc) / mt × 100% , (W = (mt - mc) / mc × 100% ), where mt is the total mass of the fuel, mc is the mass of dry matter in the fuel.