- ManufacturerКузлитмаш, ОАО
- Country of manufactureBelarus
- Weightв ассортименте g
- Engine powerв ассортименте W
- Profileв ассортименте "
- Pullв ассортименте N·m
Presses single-crank single-action closed -Designed for manufacturing parts from sheet material performing cutting operations, punching, relatively shallow drawing and other cold-stamping operations. At a press mod. CP 9534 and the CD 9536 can also perform cutting burr (burr) forged in the hot and cold.
The presses can be supplied with a hydropneumatic pillow, which is determined by the need to supply the customer.
The control system provides the ability to embed presses, automatic lines and complexes.
|Nominal gain kN||2500||2500||4000||4000|
|Slide stroke, mm, not less than||200||320||250||400|
|Frequency continuous slide stroke, min-1, at least||32||32||32||25|
|Frequency single strokes, min-1||24||24||24||19|
|Slider travel to its lowest position, where the press develops the rated force, mm||10||6||12||8|
|The distance between the table and slider in its lower position at the upper position of adjustment, mm||420||390||510||470|
|The magnitude of the distance between the adjustment table and slider, mm||140||140||160;||160|
|Bolster plate size, mm||800x800||800x800||1000x1000||1000x1000|
|The size of the slide from front to rear, mm||650||650||800||800|
|The width of the windows in racks, mm||500||500||600||600|
|Main electric motor power, kW||26.5||26.5||37.0||37.0|
|Airflow m3 / Cycle||0,006||0,006||0,017||0,017|
|Press overall dimensions, mm|
|from left to right||3000||3000||3470||3470|
|front to back||29709||2970||3140||3140|
|Height above floor level, mm||5180||5280||5940||5940|
|Press weight without gidropodushki kg||23200||23300||32000||32600|