Technical characteristics
- BrandМегалион
- Country of manufactureRussia
Description
The cost of products is calculated individually, depending on the configuration, equipment configuration and customer requirements.
Solid municipal waste arriving for processing is pre - sorted. First of all, bulky waste (KGM), wood waste, construction waste and other large fractions are selected. Further, KGM is fed to the crushing section, where it is crushed on a crushing machine.Main settings
Recycling material | Rubber, wood, solid waste |
Number of shafts | 2 |
Overload protection, auto reverse (each shaft) | there is |
Drive power | 2х45 kW |
Cutting chamber size | 1580x1030 mm |
Performance * | 5000 kg / h |
Output material size | 50 - 200 mm |
Number of knives | 38 pcs |
Knife material | Hardox 500 |
Number of teeth on a knife | 3 - 4 pcs |
Tooth height | 60 mm |
Knife thickness | 40 mm |
Shaft revolutions 1 | 22 - 26 rpm |
Shaft revolutions 2 | 22 - 26 rpm |
Oil used | ITR 220 |
The amount of oil in one gearbox | 28 l |
Reducer | Ts2 750 |
Overall dimensions of the shredder without hopper (WxDxH) | 5480x2400x2200 mm |
Hopper size (WxDxH) | 2500x2000x800 mm |
Shredder weight | 11100 kg |
Knife diameter | 500 mm |
Shaft diameter | 180 mm |
Belt drive | 10 pcs 22x14 mm |
Shaft length | 1580 mm |
Temperature mode of use | - 20 + 40 ° C |
Through the feed hopper, the raw material enters the grinding chamber, is captured by knives mounted on the shaft and is crushed. Further, the raw material enters the unloading window and falls onto the floor or onto the unloading conveyor. During shredder operation, the material is fed onto two counter - rotating shafts equipped with cutting discs with teeth or hooks. They are positioned so that the cutting disc of one shaft is always between the two discs of the other. The knives grab the material and push it between the shafts, pulling it down.
Video
Contact the seller
Shredder for solid waste