- Type of machineTwo-column
- Type of controlSemi-automatic
Two-column semiautomatic machine Pilous ARG 330 DC S.A.F.
Cast iron saw frame log bandsaw articulated is docked. Lowering the saw frame is carried out compulsorily and automatically shutting. Lowering smoothly regulated by the throttle control panel. lifting the saw frame is carried out automatically by means of a hydraulic cylinder. The operator sets the desired height of the saw frame by using the limit switch, to avoid idling. Clamp the workpiece is carried out with the help of automatic hydraulic clutches.In semi-automatic mode, the machine performs a cycle comprising the following consecutive operations: hydraulic clamp vise, enable drive bandsaw, lowering the saw frame, cutting the workpiece, stop drive bandsaw After the cutting, lifting the saw frame at the desired height, cages. These functions can be managed separately in "manual" mode. The standard machine is equipped with frequency converter that allows you to install a linear speed of bimetallic band saw in the range 15-90 m/min. for various applications. Linear speed value appears on the control panel display. The machine is equipped with Rails blocks band saw with carbide plates and rollers. Float unit guides is set depending on the size of the workpiece. Feeding system of oiling-coolant provides the necessary durability bandsaw, cooling during cutting and reduces maintenance and cleaning of the machine.
|Backing sheet billet, mm.||circle||300|
|rectangle||360 x 290|
Characteristics:Power (kW): 3 Voltage (v/Hz): 400/50 Chain speed (m/min): 15-90 Weight (kg): 1170 Dimensions (mm): 2100h1200h2350/2100h1900h2400 Vise table height (mm): 855 Hydraulic motor (v/Hz/kW): 400/50/0.37 COOLANT pump motor (v/Hz/kW): 400/50/0.12 COOLANT tank capacity (l): 30