- Country of manufactureRussia
- Typ av InstallationSemi-submersible
- Type of driveElectric
The ROSTNIPROM company manufactures a pump station according to the customer's specifications
Indicators |
unit of measurement |
Indicators |
pump equipment |
- |
At the request of the customer |
Number of working pumps |
PCS. |
13 |
reserve |
PCS. |
1 - 2 |
1st pump head |
m |
At the request of the customer |
Productivity of the 1st pump |
m³ / hour |
At the request of the customer |
Power consumption |
kWh |
Depending on the type of pump station and pumps |
Pump type |
Submersible, has a base with a branch and an automatic coupling on the pressure pipeline, which makes it possible to install it without lowering it into the receiving tank. |
|
Pump automation |
float level sensors - 4 pcs |
|
Electrical cabinet |
The programmable control controller carries out the automated operation of the pumps according to the signals of the float switches, the automatic change of the working and standby pumps to evenly distribute the operating time between both pumps. Provided alarm indication and protection of pumps against short - circuit currents, incorrect phase sequence, overload (motor protection relay), overheating (PTC thermistor or motor thermal relay), float switch malfunction, dry running, power supply malfunction with access to the dispatcher's console. Placed on racks in a vandal - proof cabinet. |
|
SPS building |
|
|
Aboveground part: |
|
At the request of the customer |
Underground part: |
SPS body is made of plastic or metal Has a reinforced double bottom and additional stiffeners. |
|
Inner diameter |
mm |
1000 - 4000 mm |
Hull depth |
mm |
1000 - 15000 mm |
|
The body houses a ladder for descending into the tank, a lattice container, a service platform, pressure pipes, and shut - off valves. The overlap of the body is equipped with hatches for lifting the lattice container, pumps and for lowering into the receiving tank. The case is ventilated. |
|
Crusher or grid container at the inlet of the gravity collector: |
|
Has stainless steel guides. |
Armature: |
- |
Non - clogging ball check valve and gate valve |
Wedge gate valve with rubber wedge |
PCS. |
2 - 4 pcs |
Check valve DN 200 mm |
PCS. |
2 - 4 pcs |
Mark of the inlet pipe (rel) |
mm |
At the request of the customer |
Inlet connection diameter |
|
At the request of the customer |