Semi-trailers "Grain" 50 m3. Gib under bodeks.

Welded from different parts: profiled rolling, bent steel channels, square and rectangular tubes. For tipper bodies on the chassis of the car and trailer are located telescopic hydraulic plunger cylinders, making it easier to purchase grain.
On the front side of the housing located observation platform, which are used in the housing. Viewing platforms are equipped with an integral ladder brackets for folding tools and the handrail. On the inner and outer surfaces of the front side are arranged stages, providing a transition from the platform to the body and vice versa.
The side and rear side of the vehicle and the trailer are presented in two parts on the upper side curtains attached to the back side of the horizontal and vertical locks; The lower parts are suspended on the veil, fixed on top side and fixed at the bottom of the rotator. The axes of the upper curtain may travel via a special key for wrapping about the bottom, top or side of the relative lateral racks. Left folding boards have only the lower parts, each of which is fixed from below via a rotary locking device.
In the upper part of the housing is closed a removable handle. Tilt the front and rear fixed expanders and right passages which are stretched by means of special devices. All these functions and features are provided with a guarantee of quality and care. This is a great argument for a grain carrier.
grains inclined housing via the plunger, the telescopic hydraulic cylinders which are connected via a high pressure.