- BrandУнигерм
- Country of manufactureRussia
- Special featureAnaerobic
TU 2257 - 407 - 00208947 - 2004 anaerobic Unigerm - 9 sealant
it is intended for strong fixing, kontrovka and sealing one - piece carving (for carving to M20(36)) and smooth connections (gap to 0,3 mm) from different metals and alloys and having protective coatings (kadmirovanny, galvanized, anodized, phosphated, etc. ), fixing of "shaft plug" connections.
Unigerm - 9 has high durability when unscrewing, prevents corrosion, increases resistance to influence of vibration loadings, prevents self - unscrewing.
Unigerm - 9 represents the liquid thixotropic composition without foreign substances of blue color possessing long life at storage in the presence of air at the room temperature and property to be cured quickly in gaps between metallic surfaces. It is applied without activator.
Unigerm - 9 sealant of the accelerated hardening that allows to use it in conveyor productions at assembly of different nodes and details.
The cured product of thermoracks and heatracks, does not cause metallic corrosion and alloys. Dismantle of connection is possible only after heating. Durability of fixing is guaranteed for the entire period of operation of product.
The designs collected with use of Unigerm - 9 have chemical and thermal endurance to oil products, solutions of acids and alkalis.
TECHNICAL CHARACTERISTICS:
Dynamic viscosity on Brukfilda, mpa * s: 1000 - 3000
Time of achievement of contact durability on carvings from M10x1.5 structural steel, min. : 5 - 15
Time of through cure (depends on t of hardening, the nature of metal of product, gap size) at 20 - 25 °C, h: 3 - 5
The unscrewing moment on carvings from M10x1.5 structural steel, in the 3rd hour, N. of m: 25 - 40
The unscrewing moment after warming up of threaded connections, N. of m:
• at 150 °C within 1000 hours: 30 - 45
• in the A - 40 antifreeze at 110 °C within 130 hours: 20 - 30
• in M63G machine oil at 130 °C during the 130th hour: 20 - 30
Durability at axial shift, MPa, not less: 15 - (25)
Strength when unscrewing in 5 hours, MPa: 10 - 16
Strength at separation, MPa: 20 - 25
Temperature range of operation, °C: - 60 … + 150 (it is short - term 200)
Most allowed gap, mm: 0,25 (0.3)
INSTRUCTIONS ON APPLICATION:
Product ready to application.
Before putting anaerobic adhesive the surface of details is cleared of pollution and degreased gasoline or toluene and acetone and other synthetic cleaners, free of nitrites.
After degreasing of detail dry before full evaporation of solvent.
Apply structure on one of details with uniform layer and collect node.
Ways of spread:
- from the bottle supplied with tip dropper. Previously the tip of bottle is cut off, and upon termination of work close tip lid.
- when drawing by brush to pour sealant in pure polyethylene container of smaller capacity. The return discharge of product in the manufacturer's container is not allowed.
- by means of dosers of different type.
Attention: feature of the used material is that its hardening happens only in certain gap, on free surface glue is not cured (that is not marriage) and is removed by means of rags.
Precautionary measures:
To store separately from foodstuff at temperature from + 5 to + 30 °C, to protect from influence of direct sunshine and hit of pollution in bottle.
At hit of sealant on skin to wash away it water with soap.
The product ready to application is delivered in polyethylene bottles with droppers tips till 0: 05, 0.1, 0.2 kg. Coefficient of filling of bottle no more than 0,6.
Possesses long life at storage.
And r and N of t and y N y y with r about to x r and N e N and I am 1 g about.
PACKING: 50 g, 100 g, 200 g, blister of 1,6 g.
The price is over 1 pieces weighing 50 g.
Быстрая и качественная консультация, вежливый персонал и индивидуальный подход.
Отличная продукция!
Буду обращаться еще!
С наилучшими пожеланиями, коллектив ООО "Адгезия".
• Цена актуальна
• Наличие актуально
• Заказ выполнен вовремя
• Описание актуально
Всё отлично. Быстро, конкретно и по делу. Молодцы!!!!