Currency SEK
Spike Cinmastic – MSK-Import, OOO | all.biz
Buy Spike Cinmastic
Spike Cinmastic

Spike Cinmastic

In stock
Reconfirm the price with seller
Payment:
  • Cash,
  • Invoice payment,
  • Visa/Mastercard,
  • Western Union,
  • D/P - Documents against Payment
  • In detail
Shipping:
Seller
Russia, Perm
(View map)
+7(4 
Display phones
Less than 1 year old on Allbiz
Technical characteristics
  • BrandHEMPEL
Description

description </ p> </ h3>

Cinmastics 001 is a two-payable putty based on an ethyl-silicate binder. </ p>

It also includes highly dispersed zinc powder. The ratio of the binder and zinc powder is 15 to 85 by weight. </ P>

destination </ p> </ h3>

Putty Cinmastic is designed to fill the irregularities and corrected defects of painted steel surfaces, seal joints and welds when installing metal structures operated in atmospheric Conditions of all climatic parasites? Onov, types and categories of placement according to GOST 15150-69, in sea and fresh water, as well as in oil and petroleum products. </ p>

Putty Cinmastics 001 are used to fill coarse defects depth of at least 2 mm. </ p>

Putty - Mastic applied in coating systems with a composition TSAES and Zinnutan . </ p>

Puttygray increases its protective? of integrated metal protection systems. </ p>

certification </ p> </ h3>

Sanitary and epidemiological conclusion No. 66.01.01.231.P.000760.03.08 of 06.03.2008. </ P>

technical characteristics </ p> </ h3>

thermosmates? Bone outdoors
................................... .................................................. .................................................. .............. 150 ° С </ p>

Ability to grind
..................................... .................................................. .................................................. .......... grinding without water </ p>

color after stirring
.................................... .................................................. .................................................. ........... Uniform gray paste </ p>

density
...................................... .................................................. .................................................. ......... 3.0 - 3.6 g / cm 3 </ span> </ p>

Mass fraction of non-volatile substances
................................... .................................................. .................................................. ............ not less than 85% </ p>

vitality after mixing
.................................... .................................................. .................................................. ........... at least 4 hours </ p>

Drying time to degree 3 according to GOST 19007-73
at a temperature (20 ± 2) ° C and relative humidity (65 ± 5)%
........ .................................................. .................................................. ....................................... no more than 5 hours </ p>

Preparing the surface </ p> </ h3>

  • surface should be deguted to the first degree according to GOST 9.402-2004; </ div> </ li>
    • Clean the surface of the metal from oxides to degree 2 in accordance with GOST9.402-2004 (SA 2 1/2 </ span> or SA 2 ISO 8501-1: 2007); </ div> </ li>
      • when carrying out repair work, the surface preparation is allowed to degree 3-4 according to GOST 9.402-2004 (ST 3 or ST 2 via ISO 8501-1: 2007); < / DIV> </ li>
        • Remove dust from the surface. </ div> </ li> </ ul>

          Applying </ p> </ h3>

          Putty Cinmastics should be applied in 1-2 layers, the thickness of one layer must be no more than 2-3 mm. </ p>

          First, it is necessary to carry the most in-depth places, after that the covered areas to handle the skin with a grain grain 4-6, then you can stick the entire surface to align it before applying other materials. </ p>

Contact the seller
Spike Cinmastic
Spike Cinmastic
Shipping method
Payment method
Compare0
ClearSelected items: 0