- Country of manufactureRussia
Ready - to - use, water - based lubricant. Safe, effective, non - hazardous material for the environment. Suitable for surface application of forms of formwork prior to pouring concrete in order to achieve rapid demoulding and a clean surface of the created concrete profiles. After removing the casting forms, concrete is obtained with a smooth, durable, uniform finish surface, with a reduced amount of voids from air bubbles.
- Semi - synthetic, ready - to - use, multi - purpose formwork separator.
- Does not contain solvents.
- Does not discolor the concrete surface.
- Provides a glossy concrete surface.
AQUA BETON is specially designed for application to various surfaces of casting forms of concrete formwork made of: plywood, wood, steel and plastic, in order to ensure the speed of mold removal and the purity of the resulting concrete surface. It is applied to the surface of the formwork before the concrete is poured and subsequently reapplied after the removal and cleaning of the casting molds. Spray or brush applied
AQUA BETON does not affect the subsequent treatment of concrete surfaces (plastering, tiling, wallpapering, painting, etc. ).
RECOMMENDATIONS FOR USE
AQUA BETON concrete mold and formwork grease is used as delivered.
For best results, it is recommended to use the OKTAMIX range of greases, cutting fluids, cleaners and anti - corrosion products. Additional information can be obtained on the website www. oktamix. ru or from the representatives of ZSM OKTAMIX LLC in your region.
The product should be stored in a closed container in a dry and clean room, away from flammable materials, heat sources and direct sunlight. Recommended storage temperature 5 - 35 ° C. Avoid deep freezing of the product. The guaranteed shelf life is 12 months.
|Index||Unit rev.||Typical value|
|Appearance||Visually||Colorless to milky liquid|
|Density at 20 ° C||g / cm³||0.98 . . . 1.15|
|Flash point||° C||no|
|Viscosity at 40 ° C||cSt||08 . . . 16|
|Operating temperature||° C||0 . . . + 40|
The values of the given physical and chemical indicators are typical for the currently manufactured products. In the future, they can be changed in accordance with the requirements of the specifications.