- BrandSatin Gyps
- Country of manufactureUzbekistan
- PurposeFinishing
The material Satin Gyps will be used in place of filter on the surfaces covered with concrete, cement or gypseous, plaster, on the smooth surfaces painted earlier. There is to be made an even and smooth surface which does not need a prime coating before a painting or wallpaper hanging work.
Application:
Before using the plaster, the surfice is required to be cleaned from various impurities. Dry and hot surfaces are required to be moistured. Dry mix should be placed into a vessel filled with water. thoroughly mixing with water (preferably with a mixer) until you get a uniform mass, after which let the mixture stay untouched for 2 - 3 minutes. The prepared mixture must be used within one hour.
Specifications:
Dilution with water: 4.51, per 10kg of the mixture:
Temperature of application: + 5° C up to + 35° C:
Time in use: 1hour:
The area to be covered: the layer of 1 mm - 1 kg/m2
Drying time: 120 - 150 min:
Hardness of the surface: 40 Shore D.